DOSIERI -e PROF TECHNIK GMBH I APPLICATION The SVSV spraying valve is used for the application of release agents, oils and paints and is suitable for both pulsating and continuous application. The SVSV is a pneumatically actuated spraying valve. It is controlled by external solenoid valves or mechanical valves. Remote adjustment is possible by using a second air connection (option). The spray air volume for the horn air can be adjusted separately, this allows the spray pattern to be adapted to individual requirements at any time - from round jet to 90° flat jet. The raster regulation allows easy adjustment of the material quantity. In the event of a defect in the needle seal, the material does not run into the air duct but out of the unit, thus preventing contamination of the air duct.