*mydirectindustry

ROTATING COUPLING

1 / 4 PagesView full catalog

ROTATING COUPLING

Product catalog summary

General Accessories

Grease Distributor 5-Fold: Available in G 1/4", G 1/8", and G 1/2" variants, this distributor includes a double nipple for optimal material feed distribution. Unused outlets can be sealed pressure-tight with supplied fittings.
Superstructure for Barrel Pump Operating Unit: Aluminum frame for mounting barrel pump accessories, available in single and tandem configurations.
Vent Hose for Barrel Pumps: 1m length, max pressure 800 bar at 20°C, 450 bar at 60°C, with a bending radius of 20 mm at 20°C.

High Pressure Barrel Pumps Accessories

Direct Switchover/Stop Automatic: Automatically switches between tandem pumps and stops when barrels are empty to prevent air intake.
Dry Run Safety: Shuts off compressed air supply when increased speed is detected to prevent unwanted emptying.
Check Valve Package: Prevents backflow into inactive pumps, available in G 3/8" and G 1/2".
Wheels for Barrel Pump FP050: Includes two fixed and two swivel castors with parking brake.

Rotating Coupling: Provides flexible connection between high-pressure hose and components, preventing torsion and unwanted opening.
High Pressure Teflon Hose: Suitable for high-temperature and aggressive media applications, resistant to most hydraulic fluids and chemicals, with a temperature range from –50°C to +230°C.
High Pressure Hose: Designed for medium-pressure hydraulic applications, suitable for temperatures from –40 to +100°C, with various connection sizes and pressure ratings.

Catalog excerpts

DOSIER -e PROF TECHNIKl GMBH GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE DP-D-003-000006 // G 1/4" 5-fold grease distributor with double nipple for optimum distribution of the material feed. The outlets that are not required can be closed off in a pressure-tight manner using the screw fittings supplied. G 1/4" = internal & external thread G 1/8" = internal & external thread G 1/2" = internal & external thread Frame made of aluminum profile for receiving and mounting the barrel pump accessories and the barrel pump operating unit. Mounted on the vent cock of the barrel pump suction pipe.

Open the catalog to page 1

HIGH PRESSURE BARREL PUMPS ACCESSORIES MATERIAL SUPPLY GENERAL ACCESSORIES DIRECT SWITCHOVER/STOP AUTOMATIC DP-F-003-000016 The automatic changeover for tandem barrel pumps is mounted in the follower plate. After the first barrel has been completely emptied (on contact with the bottom), there is an automatic switchover (automatic changeover) to the second pump mechanism. When both barrels are completely emptied, the pump switches off automatically (automatic stop), thus preventing air from being sucked in. F P200-T DRY RUN SAFETY DP-F-003-000020 // single DP-F-003-000021 // tandem The valve for...

Open the catalog to page 2

DOSIER -e PROF TECHNIKl GMBH Flexible connection between high-pressure hose and components. The coupling prevents torsion of the hose or unwanted opening of fittings and can be rotated in any direction. The high pressure teflon hose is used for medium pressure applications with hydraulic fluids at high temperatures as well as for aggressive media for the chemical industry, surface technology and 2-component plants. It is suitable for continuous temperatures from -50 °C to +150 °C and +230 °C at operating pressures up to 2 mpa and is resistant to almost all hydraulic fluids and chemicals. Inner...

Open the catalog to page 3

GENERAL ACCESSORIES HIGH PRESSURE HOSE DP-D-002-000001 // G 1/4" The high pressure hose is used for demanding medium-pressure hydraulic applications and for media such as hydraulic fluids, mineral oil or water-glycol based, lubricating oils, air and water. It is suitable for the temperature range from -40 to +100 °C. Inner layer material: nitrile Compression member: Two high-tensile steel mesh Applications

Open the catalog to page 4

ROTATING COUPLING

ROTATING COUPLING

Catalog excerpts

All Dosier- und Prüftechnik GmbH catalogs and technical brochures