DOSIER -e PROF TECHNIK GMBH With the PDV03 proportional dosing valve, continuous as well as spot application of oils and greases up to a volume of 0.5 cm3 is possible. The PDV03 proportional dosing valve is a split system and has no integrated electronics. The resulting more compact size allows it to be mounted directly at the point of use. In addition, the PDV03 operates electromechanically and does not require a pneumatic connection.The separate electronic control can be mounted flexibly with a permissible cable length of 3-20 meters. The control takes place via the D+P dosing system DS. The freely selectable metering volume can be infinitely adjusted and applied at variable speed with pinpoint accuracy or over a wide area. In the case of automated dispensing of several different positions on a workpiece, each position can be dispensed individually. This means that entire wetting profiles can be processed within one dispensing process. The PDV03 is viscosity-, pressure- and temperature-independent and ensures extremely process-reliable metering thanks to electronic monitoring of the valve piston by means of an encoder. TECHNICAL DATA Mechanical data

PROPORTIONAL DOSING VALVE PDV03 ACCESSORIES CONTROL AND CONNECTION CABLE FOR PDV03 DP-D-005-000011 DP-D-005-000040 The control and connection cable is used for signal exchange between the dosing system and the PDV03 proportional dosing valve. The standard length is 5 meters, but can also be customized on request (max. 20 meters). Complete package incl. sleeve with seal set and dosing needle.