1. Catalogs
  2. Dosier- und Prüftechnik GmbH
  3. MATERIAL FABRIC / OIL PRESSURE HOSE

MATERIAL FABRIC / OIL PRESSURE HOSE

MATERIAL FABRIC / OIL PRESSURE HOSE

MATERIAL FABRIC / OIL PRESSURE HOSE

Product catalog summary
Material Filter
Stainless steel material filter designed for filtering liquid media, mounted on the material pressure tank. Key specifications include a 100 mesh filter, material 1.4305, compressive strength of 250 bar, and a connection size of G 1/4".
Pressure Switch Type 804-10 / Type 804-20
These pressure switches are used for monitoring material pressure in the supply line. The Type 804-10 has a pressure range of 1–10 bar, while Type 804-20 ranges from 2–20 bar. Both types have a compressive strength of 300 bar, a maximum voltage of 250 V, a maximum current of 2 A, and a connection size of G 1/4".
Pressure Sensor PN 7093 Digital
An electronic pressure sensor with a display for monitoring material pressure in the supply line. Features include two switching outlets, two output signals, and a 4-digit alphanumeric display with red-green alternating display. The pressure range is 0–25 bar, with a compressive strength of 150 bar, voltage range of 18–30 V, and a maximum current of 150 mA. It has a connection thread of G 1/4" and an electrical plug connection of 1x M12 A-coded.
Material Fabric / Oil Pressure Hose
A universal hose resistant to a wide range of media, suitable for mineral oil products with a maximum aromatics content of 50% and alternative fuels like RME or vegetable oils up to +70 °C (+158 °F). It features a connection thread of G 1/4", an outer diameter of 12.0 mm, a maximum operating pressure of 20 bar, and a minimum bending radius of 25 mm.
See more

Catalog excerpts

MATERIAL FABRIC / OIL PRESSURE HOSE-1

DOSIER -e PROF TECHNIK GMBH MATERIAL PRESSURE TANKS ACCESSORIES MATERIAL FILTER DP-K-004-000004 Stainless steel material filter for filtering liquid media. Mounted on the material pressure tank.

 Open the catalog to page 1
MATERIAL FABRIC / OIL PRESSURE HOSE-2

DOSIERI -e PROF TECHNIK GMBH I MATERIAL PRESSURE TANKS ACCESSORIES PRESSURE SENSOR PN 7093 DIGITAL DP-K-007-000011 // type PN 7093 Electronic pressure sensor with display for monitoring the material pressure in the supply line. » 2 switching outlets (make/break contact parameterizable) » 2 output signals (switching signal, lO-Link configurable) » 4-digit alphanumeric display (digital display) with red-green alternating display

 Open the catalog to page 2

All Dosier- und Prüftechnik GmbH catalogs and technical brochures

  1. PULSE VALVES

    6  Pages

  2. BARREL PUMPS

    6  Pages

  3. DOSING VALVES

    6  Pages

  4. OUTLET VALVES

    6  Pages

  5. OUTLET VALVE

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.