*mydirectindustry

Catalogs
Dosier- und Prüftechnik GmbH
GREASE SHOT VALVE FSV02 DOUBLE

GREASE SHOT VALVE FSV02 DOUBLE

Product catalog summary

Application
The grease shot valve FSV02 is designed for applying various viscous media from a distance of up to 120 mm.

Description
The FSV02 includes a solenoid valve and a micromodule with an optimized nozzle and dual heating controllers. It ensures precise material discharge as a point or bead, controlled exclusively via the D+P dosing system. Nozzle sizes range from Ø 0.21 to 0.81 mm.

Advantages
The 2-valve shut-off technology allows for metering very small quantities with short switching times. Its compact design facilitates use in tight spaces. The valve is splash-proof and includes an integrated material filter for clean discharge.

Time Controlled Dosing

Technical Data

Dimensions: Width 348 mm, Height 625 mm, Depth 273 mm
Mounting position: Any, including overhead
Max. pumpable viscosity: Oils and greases NLGI class 0–3
Application quantity per shot: 1–20 cm³
Material temperature: Max. 120 °C
Switching frequency: Max. 100 Hz
Medium inlet pressure: 5–68 bar, depending on application and viscosity
Order distance: Max. 120 mm
Heating time: Approx. 5 min
Pneumatic air pressure: 6 bar, optionally with pressure booster
Line length control air: Max. 100 mm

Environmental Conditions

Storage and transport temperature: –40 to 70 °C
Working temperature: 35 to 65 °C
Ambient temperature: –7 to 50 °C
Humidity: 50–70%
Material must be at correct processing temperature, especially if coming from cold storage or if heating/cooling is provided.
Operation in closed rooms, protected from sunlight, dust, and moisture. Max installation altitude: 2000 meters.

EMC Resistance
Complies with EN 61000-6-2:2001 for industrial areas.

Electrical Data

Temperature sensor: PT 100 / 2 conductors
Power supply: 240 V AC 50–60 Hz
Power heating: 240 V, 155 W

Catalog excerpts

OSIER PROF TECHNIK GMBH APPLICATION The grease shot valve is used to apply various viscous media from a distance of up to 120 mm. The FSV02 simple includes a solenoid valve, as well as a micromodule with optimized nozzle and heating with two heating controllers. The material is discharged with perfect tear-off as a point or bead. The control takes place exclusively via the D+P dosing system. Available nozzle sizes: 0 0.21-0.81 mm The 2-valve shut-off technology enables metering of very small quantities with very short switching times, and the compact design means that the nozzle can be optimally used even in the tightest of spaces. The valve is splash-proof and has an integrated material filter to ensure permanently clean material discharge.

Open the catalog to page 1

GREASE SHOT VALVE FSV02 DOUBLE

GREASE SHOT VALVE FSV02 DOUBLE

Catalog excerpts

All Dosier- und Prüftechnik GmbH catalogs and technical brochures