GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE

Product catalog summary

General Accessories Overview
This document provides detailed specifications and descriptions of various accessories for high-pressure barrel pumps and related equipment. The accessories are designed to enhance the functionality and efficiency of the pumps in industrial applications.

Grease Distributor
The 5-fold grease distributor, available in three variants (G 1/4", G 1/8", G 1/2"), is equipped with a double nipple for optimal material distribution. Unused outlets can be sealed pressure-tight with supplied screw fittings.

Superstructure for Barrel Pump Operating Unit
Available in single and tandem configurations, this aluminum frame supports the mounting of barrel pump accessories and operating units.

Vent Hose for Barrel Pumps
This hose, with a length of 1 meter, is designed for mounting on the vent cock of the barrel pump suction pipe. It can withstand pressures up to 800 bar at 20°C and 450 bar at 60°C.

Direct Switchover/Stop Automatic
This feature allows automatic changeover between tandem barrel pumps and stops the pump when both barrels are empty, preventing air intake.

Dry Run Safety
Available in single and tandem versions, this valve automatically shuts off the compressed air supply when an increased conveying speed is detected, preventing unwanted container emptying.

Check Valve Package
Available in G 3/8" and G 1/2" sizes, these valves prevent backflow into inactive pumps by closing automatically against the flow direction.

Wheels for Barrel Pump FP050
This set includes two fixed and two swivel castors with a parking brake for mobility and stability.

Rotating Coupling
Available in G 1/4" and G 1/8", this coupling provides a flexible connection between high-pressure hoses and components, preventing torsion and unwanted opening of fittings.

High Pressure Teflon Hose
Designed for medium pressure applications, this hose is suitable for temperatures from –50°C to +230°C and is resistant to most hydraulic fluids and chemicals. It is available in G 1/8", G 1/4", and G 3/8" sizes.

High Pressure Hose
Available in G 1/4", G 1/8", G 3/8", and G 1/2", this hose is used for medium-pressure hydraulic applications and can handle temperatures from –40 to +100°C. It features a nitrile inner layer and two high-tensile steel mesh compression members.

Technical Data Summary
Each accessory includes specific technical data such as connection sizes, maximum operating pressures, and minimum bending radii, ensuring compatibility and performance in various industrial settings.

Catalog excerpts

GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE-1

DOSIER -e PROF TECHNIKl GMBH GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE DP-D-003-000006 // G 1/4" 5-fold grease distributor with double nipple for optimum distribution of the material feed. The outlets that are not required can be closed off in a pressure-tight manner using the screw fittings supplied. G 1/4" = internal & external thread G 1/8" = internal & external thread G 1/2" = internal & external thread Frame made of aluminum profile for receiving and mounting the barrel pump accessories and the barrel pump operating unit. Mounted on the vent cock of the barrel pump suction pipe.

Open the catalog to page 1

GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE-2

HIGH PRESSURE BARREL PUMPS ACCESSORIES MATERIAL SUPPLY GENERAL ACCESSORIES DIRECT SWITCHOVER/STOP AUTOMATIC DP-F-003-000016 The automatic changeover for tandem barrel pumps is mounted in the follower plate. After the first barrel has been completely emptied (on contact with the bottom), there is an automatic switchover (automatic changeover) to the second pump mechanism. When both barrels are completely emptied, the pump switches off automatically (automatic stop), thus preventing air from being sucked in. F P200-T DRY RUN SAFETY DP-F-003-000020 // single DP-F-003-000021 // tandem The valve for...

Open the catalog to page 2

GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE-3

DOSIER -e PROF TECHNIKl GMBH Flexible connection between high-pressure hose and components. The coupling prevents torsion of the hose or unwanted opening of fittings and can be rotated in any direction. The high pressure teflon hose is used for medium pressure applications with hydraulic fluids at high temperatures as well as for aggressive media for the chemical industry, surface technology and 2-component plants. It is suitable for continuous temperatures from -50 °C to +150 °C and +230 °C at operating pressures up to 2 mpa and is resistant to almost all hydraulic fluids and chemicals. Inner...

Open the catalog to page 3

GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE-4

GENERAL ACCESSORIES HIGH PRESSURE HOSE DP-D-002-000001 // G 1/4" The high pressure hose is used for demanding medium-pressure hydraulic applications and for media such as hydraulic fluids, mineral oil or water-glycol based, lubricating oils, air and water. It is suitable for the temperature range from -40 to +100 °C. Inner layer material: nitrile Compression member: Two high-tensile steel mesh Applications

Open the catalog to page 4