DOSIERI -e PROF TECHNIK GMBH I APPLICATION The DV05 is suitable for volumetric dosing of low to high viscosity media in the dosing range of 0.003-0.5 cm3 and can be used for manual as well as automatic dosing processes. The valve consists of two structurally separate parts. This design prevents uncontrolled leakage of the medium into the pneumatic cylinder and thus prevents interference with the valve needle. The exact dosing quantity is set via the adjusting nuts with readable quantity scale, which enables repeatable, exact and precise dosing. The metering cycle can be controlled pneumatically by means of a 5/2 directional control valve. The DV05 is characterized by high reliability and low maintenance. The modular seal package ensures fast and service-friendly maintenance in just a few steps. The seals meet the latest technological standards and ensure a long service life for the valve.

VOLUMETRIC DOSING DOSING VALVE DV05 ACCESSORIES STROKE MONITORING P DP-D-010-000020 Cylinder switch with reed contact for sensing the dosing and loading position. STROKE MONITORING K DP-D-010-000021 Switch with inductive sensor BES00HF for sensing the dosing and loading position. SEALING PACKAGE DP-D-010-000040 Complete package incl. sleeve with seal set and dosing needle. PLASTIC HOSE DP-D-002-000030 // Outer diameter 2.5 mm DP-D-002-000031 // Outer diameter 4 mm Pressure-resistant plastic hose for dosing valves. Connection 1: 1/8" Connection 2: 1/8" or M6x0,57 (e.g. for dosing head) Length...