DOSIERI -e PROF TECHNIK GMBH I DP-K-002-000065 // Dosing valve 1029662 DP-K-002-000066 // Dosing valve 1023208 DP-K-002-000008 // Dosing valve C-415.12.00 DP-K-002-000009 // Dosing valve C-415.12.21 APPLICATION The chamber dosing valve enables dot application of low to high viscosity media. In contrast to the mini dosing valve, it covers a wider range of possible dosing quantities. The valve consists of two structurally separate parts. This design prevents uncontrolled leakage of the medium into the pneumatic cylinder and thus prevents interference with the valve needle. The shot volume can be set within a predefined range using the stop screw. The dispensing cycle is controlled pneumatically or electrically by means of a solenoid valve. Manual application by hand is just as possible as integration into a fully automated process. The chamber dosing valve is characterized by high reproducibility, short cycle times and low maintenance requirements. The mode of operation also enables higher process reliability as well as a suck-back effect, which prevents dripping of low-viscosity media.

VOLUMETRIC DOSING CHAMBER DOSING VALVE ACCESSORIES HANDLE DP-K-002-000020 // pneumatic DP-K-002-000021 // electric Handle for dosing valves for manual application. Available in electric and pneumatic versions. STROKE MONITORING 2-FOLD FOR DOSING VALVE DP-K-002-000034 STROKE MONITORING 2-FOLD FOR C-SLOT ON DOSING VALVE DP-K-002-000041 STROKE MONITORING 2-FOLD FOR DOSING VALVE (NEW VALVE GENERATION) DP-K-002-000042