SC-Doseuro Model A HP
7Pages

DATA SHEET Metering pumps Model A for high pressure Doseuro models A are used in the most severe duty applications. Plunger pumps are the best solution when: PUMPED LIQUID DOES NOT CONTAIN SUSPENDED SOLIDS LEAKAGE IS ACCEPTABLE HIGH PRESSURE IS REQUIRED Applications Injection of chemicals as oxygen scavanger, amine, trisodium phosphate and much more. Commonly used in the following applications: • Chemical industry • Cooling towers • Power plants Features • Simplex and multi-head version are available. • BSPPm valve connections are standard. Flanged or other connections are available upon request. • Cataphoresis painting for gearbox. • Endless screw worm gear box supported by bearings and fully lubricated in an oil bath. • Fitted as standard with high quality 4 pole electric motor that conform to UNEL-MEC specifications, and range from 0,18kW to 0,75kW. Standard 3 phase voltages are 220-240V(Δ) 380-415 (Y) 50Hz / 220-280V(Δ) 380-480 (Y) 60Hz. Standard 1 phase voltage 230V-50Hz. Motors are available to meet a wide range of alternative specifications including: ATEX; different voltages, frequencies, higher insulation standards and more. • Stroke adjustment can be made with the pump at rest or in operation and it can be manual or an automatic actuator can be driven by a 4-20 mA; different BUS; pneumatically. • Components in wetted areas are available in a wide range of materials suitable for chemical inje

General specifications Pump model Pump model METERING PUMPS MODEL A FOR HIGH PRESSURE Data is for reference only and subject t

General specifications Pump model Wetted parts code for standard materials Standard construction materials (wetted parts only) Material codes Pump head Plunger gasket Valve ball Valve seat Valve gasket METERING PUMPS MODEL A FOR HIGH PRESSURE Data is for reference only and subject to change

Electric motor Pump model METERING PUMPS MODEL A FOR HIGH PRESSURE Data is for reference only and subject to change without notice.

Electric motor Pump model METERING PUMPS MODEL A FOR HIGH PRESSURE Data is for reference only and subject to change without notice.

Electric motor Pump model METERING PUMPS MODEL A FOR HIGH PRESSURE Data is for reference only and subject to change without notice.

How to read the pump model ADDITIONAL INFORMATION STROKE LENGTH VALVE TYPE PLUNGER Ø MATERIAL REDUCER RATIO How to read the pump code MOTOR PHASE 0 = WITHOUT MOTOR 1 = 1PH A = 3PH STROKE ADJUSTMENT 1 = MANUAL 3 = PNEUMATIC 2 = 4-20mA 8 = PROFIBUS DP OTHERS MOTOR INFORMATION 1 = 230V/50HZ A = 230/400V 50/60HZ 230/460 60HZ 0 = WITHOUT MOTOR WETTED PARTS MATERIALS GEAR REDUCTION 1 = B 3 = F 5 = I 2 = C 4 = A A 0F 014 1 082 2 1 1 A A 0 0 DESIGN PRESSURE: 0 = STD 1 = HIGH PRESSURE 2 = MEDIUM PRESSURE VALVE TYPE 1 = SINGLE BALL 2 = DOUBLE BALL PUMP TYPE PUMP SIZE 0E = 125N 0F = 175N 0H = 250N 0L...