SC - Doseuro Model D
8Pages

DATA SHEET Metering pumps Model D Doseuro model D are used in the most severe duty applications. Mechanical Diaphragm dosing pumps are the best solution when: PUMPED LIQUID CONTAINS SMALL AMOUNTS OF SUSPENDED SOLIDS PUMPED LIQUID IS HAZARDOUS NO LEAKAGE IS ALLOWED HIGH PRESSURE IS NOT REQUIRED Applications Injection of chemicals as coagulant, fertilizer, acids, polymers and much more. Commonly used in the following applications: • Fertigation • Water treatment • Paper industry • Chemical industry • Food industry • Cooling towers Features • Simplex and multi-head versions are available. • BSPPm valve connections are standard. Flanged or other connections are available upon request. • Cataphoresis painting for gearbox. • Endless screw worm gear box supported by bearings and fully lubricated in an oil bath. • Fitted as standard with high quality 4 pole electric motor that conform to UNEL-MEC specifications, and range from 0,18kW to 0,75kW. Standard 3 phase voltages are 220-240V(Δ) 380-415 (Y) 50Hz / 220-280V(Δ) 380-480 (Y) 60Hz. Standard 1 phase voltage 230V-50Hz. Motors are available to meet a wide range of alternative specifications including: ATEX; different voltages, frequencies, higher insulation standards and more. • Stroke adjustment can be made with the pump at rest or in operation and it can be manual or an automatic actuator can be driven by a 4-20 mA; different BUS; pneumatically. • Components in wetted areas are available in a wide range of materials suitable for chemical injection applications.

General specifications Pump model Pump model METERING PUMPS MODEL D Data is for reference only and subjec

General specifications Pump model METERING PUMPS MODEL D Data is for reference only and subject to change with

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL D Data is for reference only and subject to change

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL D Data is for reference only and subject

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL D Data is for reference only and su

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL D Data is for reference only and subject to chang

How to read the pump model ADDITIONAL INFORMATION STROKE LENGTH VALVE TYPE DIAPHRAGM Ø REDUCER RATIO How to read the pump code MOTOR PHASE 0 = WITHOUT MOTOR 1 = 1PH A = 3PH STROKE ADJUSTMENT 1 = MANUAL 3 = PNEUMATIC 2 = 4-20mA 8 = PROFIBUS DP OTHERS MOTOR INFORMATION 1 = 230V/50HZ A = 230/400V 50/60HZ 230/460 60HZ 0 = WITHOUT MOTOR WETTED PARTS MATERIALS GEAR REDUCTION 1 = B 3 = F 5 = I 2 = C 4 = A DESIGN PRESSURE: 0 = STD 1 = HIGH PRESSURE 2 = MEDIUM PRESSURE VALVE TYPE 1 = SINGLE BALL 2 = DOUBLE BALL PUMP TYPE PUMP HEAD TYPE 1 = STANDARD 2 = WITH FLUSHING N = NEW VERSION DIAPHRAGM...