SC - Doseuro Model B
8Pages

DATA SHEET Metering pumps Model B Doseuro models B are used in the most severe duty applications. Hydraulic Diaphragm pumps are the best solution when: PUMPED LIQUID CONTAINS SMALL AMOUNTS OF SUSPENDED SOLID DOSED MEDIUM IS TOXIC, CORROSIVE, HAZARDOUS LEAKAGE IS NOT ACCEPTABLE HIGH PRESSURE IS NOT REQUIRED Applications Injection of chemicals as coagulant, fertilizer, acids, polymers, oxygen scavanger, amine and much more. Commonly used in the following applications: • Fertigation • Water treatment • Paper industry • Chemical industry • Food industry Features • Simplex and multi-head versions are available. • BSPPm valve connections are standard. Flanged or other connections are available upon request. • Cataphoresis painting for gearbox. • Endless screw worm gear box supported by bearings and fully lubricated in an oil bath. • Fitted as standard with high quality 4 pole electric motor • Cooling towers that conform to UNEL-MEC • Power plants specifications, and range from 0.18kW to 0.75kW. Standard 3 phase voltages are 220-240V(Δ) 380-415 (Y) 50Hz / 220-280V(Δ) 380-480 (Y) 60Hz. Standard 1 phase voltage 230V-50Hz. Motors are available to meet a wide range of alternative specifications including: ATEX; different voltages, frequencies, higher insulation standards and more • Stroke adjustment can be made with the pump at rest or in operation and it can be manual or an automatic actuator can be driven by a 4-20 mA; different BUS; pneumatically. • Components in wetted areas are available in a wide range of materials suitable for chemical injection applications

General specifications Pump model METERING PUMPS MODEL B Data is for reference only and subject to change

General specifications Pump model METERING PUMPS MODEL B Data is for reference only and subject

General specifications Pump model Wetted parts code for standard materials Standard construction materials (wetted parts only) Material codes Pump head Valve ball Valve seat METERING PUMPS MODEL B Data is for reference only and subject to change without notice.

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL B Data is for reference only

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL B

Pump model Execution INOX Execution Plastic METERING PUMPS MODEL B Data is for reference only and su

How to read the pump model ADDITIONAL INFORMATION STROKE LENGTH VALVE TYPE PLUNGER Ø MATERIAL REDUCER RATIO How to read the pump code MOTOR PHASE 0 = WITHOUT MOTOR 1 = 1PH A = 3PH STROKE ADJUSTMENT 1 = MANUAL 3 = PNEUMATIC 2 = 4-20mA 8 = PROFIBUS DP OTHERS MOTOR INFORMATION 1 = 230V/50HZ A = 230/400V 50/60HZ 230/460 60HZ 0 = WITHOUT MOTOR WETTED PARTS MATERIALS GEAR REDUCTION 1 = B 3 = F 5 = I 2 = C 4 = A B 0F 030 1 043 2 1 1 A A 0 0 VALVE TYPE 1 = SINGLE BALL 2 = DOUBLE BALL PUMP TYPE PUMP SIZE 0E = 125N 0F = 175N 0H = 250N PUMP HEAD TYPE 1 = STANDARD 2 = WITH FLUSHING PLUNGER DIAMETER...