"GALIL" RIGID-SEAL HYDRAULIC VALVES MODELS 09, 09-AN, 09-T, 09-AN-T DESCRIPTION The diaphragm actuated, rigid-seal, hydraulic valve is produced in two patterns: 1. Oblique Pattern (standard) 2. Angle Pattern (marked "AN"). The same actuator is used for both patterns. "Normally open", "Normally closed", "Fail-safe" and "Throttling" versions are available. An external pipe connection converts the basic valve to the N.C. version. A spring, installed inside the actuator, creates a "fail-safe", version N.O. or N.C. A throttling device, limiting valve opening, is optional for all versions. STANDARD MODEL "FAIL SAFE" (F.S.) MODEL

"GALIL" RIGID-SEAL HYDRAULIC VALVES FLOW FACTOR MATERIALS BODY ACTUATOR HOUSING BONNET DISCS STEM O-RINGS SEAL DIAPHRAGM SPRING BRASS CAST BRONZE GLASS REINFORCED POLYAMIDE BRASS SST NBR RUBBER NR RUBBER NR RUBBER SST CONNECTIONS THREADS BODY CONTROL BORE THE FACTORY RESERVES THE RIGHT TO MODIFY SPECIFICATIONS WITHOUT PRIOR NOTICE.

DIAPHRAGM BOLT SMALL DISC LARGE DISC ADAPTER SEAL (O-RING) STEM SEAL (O-RING) INTEGRAL SEAL THROTTLING ASSEMBLY SPRING (FS VERSION ONLY) ORDERING GUIDE Example: Selected, is the angle patterned valve, "normally-closed" (hydraulic), allowing for flow control. The threads meet the American Standard. PATTERN (NOT REQUIRED FOR OBLIQUE MODEL) THREAD STANDARD