DAV-MP-1-K Kinetic Air-Valve Metallic-Shield This valve has been designed for efficient discharge and intake of air in water pipelines, filtering systems, containers, and other places where confined air could impair the system’s operation. The valve is designed for: • Releasing high volumes of air during the initial filling of the system • Introducing large quantities of air when the pipe drains, maintaining atmospheric pressures in the pipe and preventing collapse and cavitation damage to the conduits Properties: Leak-proof sealing at all conditions, including low system pressure. The aerodynamic design of the float provides air flow at a very high velocity. The float will not close before the water has reached the valve. Threaded outlet elbow allows various possibilities of drain connection. The valve design contains a very limited number of parts, allowing easy dismantling for maintenance. of air into the pipeline when the internal pressure is sub-atmospheric. The pressure difference and the gravity, force the float to drop to “opened” position, allowing large volumes of air to flow into the pipe. Technical Specifications: • Operating pressure 0.2 to 25 bar • 1” BSP or NPT threaded base • • • • as per the customer’s choice Cover material: Cast Iron Base Material: Brass Internal parts: corrosion resistant, reinforced plastic materials and synthetic rubber The valve allows the discharge of over 220m3/h of air at a pipe pressure of 1.0 bar, when fully-open The DAV-MP-K valve has two modes of operation: • Discharge of large quantities of air at a high flow velocity when the conduit is being filled. When the water arrives to the valve, the float rises up and closes the outlet. Pipe is full of water

Parts list and specifications: Part Metallic Cover Cast Iron Drainage Elbow Foam Polypropylene Kinetic Seal K-Kinetic Nozzle Area Performance: Discharge data (free air flow) Inflow data (free air flow)