60ANC-1½ Normally-Closed Valve General description • The 60ANC is a Normally- Closed Hydraulic Valve, designed to control the flushing process of industrial filters. It can be used for any application that requires Drip-tight, Normally- Closed control. • The valve is not suitable for regulation of the flow or pressure. It should be used for On / Off applications only. • The valve is made of Reinforced Polypropylene material. All the rubber components are made of Synthetic materials. • The metal parts: spring and bolts, are of SST material. • Fast reaction to Open / Close control • Tough and durable construction. • Resistance to corrosive liquids • Internal trim designed for easy disassembly and maintenance, by removing the bonnet and pulling out trim (as a cassette). • Angle- pattern provides low energy loss. • Drip- tight sealing at Zero pressure Technical Specifications SI Operating pressure range Temperature range Inlet (Female thread) Outlet (male thread) Command ports (optional) Kv / Cv Factor Min. Command pressure Equal or larger than 60% of inlet pressure, Min. 0.4 barg

60ANC-1½ Normally-Closed Valve Operating modes Closed valve Opened valve Description Body Control port (optional) Locking nut O-Ring 2-2111 Seal disk O-Ring 2-145 Seal Top seal disk Seat Nut Shaft Spring Diaphragm seat Washer Bolt Diaphragm Diaphragm disk Bonnet Material PPGF PPGF NBR * PPGF NBR * EPDM PPGF PPGF SST PPGF SST PPGF SST SST EPDM PPGF PPGF * Viton O-rings can be supplied on request.