The compomix FI has been specially designed for the impregnation of fibre rovings in vacuum infusion, resin transfer moulding (RTM), pultrusion, and filament winding processes. It ensures the precise metering and mixing of two-component material used for glass, ara-mid or carbon fibre impregnation (FI). Depending on the application specifics, the compomix FI can be used to either fill a resin bath and keep it at fill level, or to inject material directly into a mould. The material is supplied from two material tanks installed on the system. The tanks are filled directly from the original delivery containers and this is done automatically either via standard refill systems or gravimetry. Technical specification Material discharge Ca. 100- 800 cm3 , depending on mixing ratio and viscosity Mixing ratio 100 : 15-50, by volume Mixing system Static ■ Plastic mixer tube Material supply Gravimetric / alternatively with refilling pumps Viscosity range 10 - 500 mPas at working temperature Features and benefits ■ Simple and comfortable operation ■ Resin bath filling or pressure-regulated injection via attachment, change of sensor prossible ■ Wide range of applications thanks to variable mixing ratio and discharge rate ■ Easy integration into existing production processes ■ Low pulsation gear pump technology

Standard Mobile welded frame 2 x 45 l stainless steel material pressure tanks Material pressure tank equipped with: ■ Agitator (A component) ■ Level control ■ Preparation for automatic refilling Silicagel dehumidifier Gear metering pumps with overpressure protection Three-phase asynchronous motors Control or regulation of mixing ratio and discharge rate with flowmeters Manual cycle on A component Static mixing system ■ 2K valve with separate material supply ■ static mixer tube, plastic Optional Direct supply without material tanks Material supply via immersion pumps or drum pumps Material pressure...