PUMA VT series
24Pages

PUMA VTseries High Performance Vertical Turning Center Doosan Machine Tools Optimal Solutions for the Future

PUMA VTseries The vertical turning center is designed for long term accuracy, heavy duty cutting and to minimize floor space. Its powerful spindle drives, meehanite casting and integral box guide way provide unsurpassed rigidity.

New standard for unsurpassed high productivity, high speed and high precision

Basic Mechanism Robust Bed Construction In order to assure heavy duty machining and optimized chip flow, the machine base body is designed and streamlined. Its small foot print help you systemizing your manufacturing plan plot in your factory. Robust Column Construction The wide hardened and ground box ways reduce vibration promoting better tool life and surface finishes. The box ways are turcite coated which allows for 787 ipm rapid traverse rates. The Balanced Counter Weight located inside the column, neutralizes the gravity effect on the Vertical slide. It will also conserve electricity...

Chip Disposal Chip Conveyor Rear Chip Conveyor Rear Chip Conveyor Left Over head Coolant for chuck Chip Conveyor Right Flexible Chip Conveyor Right / Left (Rear / Side) Safety Cover Easy Operation Poly carvonate double steel cover The swing arm on the Main Operation panel is a userfriendly feature to minimize the distance from Part to operator’s Panel during setup. Narrow Vertical panel is space saving design. The handy Sub Operation Panel beside Door for each spindle has Cycle start, Feed hold, Emergency stop, Door Open/close switches. Auto door Pneumatic cylinder Manual tool setter...

Main Specification Travels (X / Z axis) Chuck size Max. Spindle speed Spindle motor (Cont. / 15min.) Rapid Traverse (X / Z axis) Turret index time No. of tool station mm (inch) mm (inch) r/min kW (Hp) m/min (ipm) s stations Machine weight Main Spindle Power-torque Diagram Torque : N.m (ft- lb) High 22 kW (29.5 Hp) 30 min Power High 18.5 kW (24.8 Hp) Continuous Power High 18.5 kW (24.8 Hp) Continuous Torque Spindle Speed (r/min) High Gear 26kW (34.9) 30min Power High Gear 22kW (29.5) Continuous Power Low Gear 22kW (29.5) Continuous Power Low Gear 22kW (29.5) Continuous Torque PUMA VT450 with...

Main Specification Working Range Machine weight Interference area mm (inch) mm (inch) r/min kW (Hp) m/min (ipm) s stations Travels (X / Z axis) Chuck size Max. Spindle speed Spindle motor (Cont. / 30min.) Rapid Traverse (X / Z axis) Turret index time No. of tool station If working length 160mm (6.3 inch) excess, interference area Main Spindle Power-torque Diagram Torque : N.m (ft- lb) 40 (53.6) Low 30 kW (40.2 Hp) Low 30 kW (40.2 Hp) High 30 kW (40.2 Hp) 30 min Torque 30 min Power 30 min Power High 22 kW (29.5 Hp) Continuous Power Spindle Speed (r/min) High Gear 37 kW (49.6 Hp) 30 min Power...

Main Specification Working Range mm (inch) mm (inch) r/min kW (Hp) m/min (ipm) s stations Machine weight PUMA VT900 with ZF Gearbox Low Gear 45 kW (60.3 Hp) 30 min Torque Low Gear 37 kW (49.6 Hp) Continuous Power Low Gear 37 kW (49.6 Hp) Continuous Torque High Gear 45 kW (60.3 Hp) 30 min Torque High Gear 37 kW (49.6 Hp) Continuous Torque Spindle Speed (r/min) High Gear 45 kW (60.3 Hp) 30 min Power High Gear 37 kW (49.6 Hp) Continuous Power Interference area Main Spindle Power-torque Diagram Torque : N.m (ft- lb) Travels (X / Z axis) Chuck size Max. Spindle speed Spindle motor (Cont. /...

Main Specification mm (inch) mm (inch) r/min kW (Hp) Machine weight PUMA VT1100 with ZF Gearbox Low Gear 55 kW (73.8 Hp) 30 min Torque Low Gear 60 kW (80.5 Hp) 10 min Power 70 (93.9) High Gear 60 kW (80.5 Hp) 10 min Power 60 (80.5) High Gear 55 kW (73.8 Hp) 30 min Power High Gear 45 kW (60.3 Hp) 40 (53.6) Low Gear 45 kW (60.3 Hp) Continuous Power Continuous Power Low Gear 45 kW (60.3 Hp) Continuous Torque 30 (40.2) High Gear 55 kW (73.8 Hp) 30 min Torque Main Spindle Power-torque Diagram 6860 (5062.7) Travels (X / Z axis) Chuck size Max. Spindle speed Spindle motor (Cont./30min./10min.)...

Tooling System Unit: mm (inch) Facing Tool Face Holder Boring Sleeve U-Drill Sleeve U-Drill Sleeve Drill Socket Boring Holder Boring Sleeve U-Drill Cap Facing Tool Collet Adapter Face Tool Holder Stright milling unit Milling Arbor Adapter Angular milling unit U-Drill Cap (BMT 65) Weldon Adapter Plug Boring Sleeve U-Drill Sleeve Note) bove tooling system is our recommendation. A Depending on export condition, the standard tooling packed with the machine can be different.

Boring Sleeve U-Drill Sleeve U-Drill Sleeve Drill Socket Boring Sleeve U-Drill Cap ø50 Facing Tool Collet Adapter Face Tool Holder Stright milling unit Milling Arbor Adapter Angular milling unit U-Drill Cap (BMT 75) Weldon Adapter Plug Boring Sleeve U-Drill Sleeve Note) bove tooling system is our recommendation. A Depending on export condition, the standard tooling packed with the machine can be different.

Tooling System Unit: mm (inch) U-Drill Cap Drill Socket U-Drill Sleeve Boring Sleeve Boring Sleeve U-Drill Sleeve Facing Tool Collet Adapter Face Tool Holder Stright milling unit Milling Arbor Adapter Angular milling unit U-Drill Cap (BMT 85) Weldon Adapter Plug Boring Sleeve U-Drill Sleeve Note) bove tooling system is our recommendation. A Depending on export condition, the standard tooling packed with the machine can be different.

U-Drill Cap Drill Socket U-Drill Sleeve Boring Sleeve Boring Sleeve U-Drill Sleeve Facing Tool Collet Adapter Face Tool Holder Stright milling unit Milling Arbor Adapter Angular milling unit U-Drill Cap (BMT 85) Weldon Adapter Plug Boring Sleeve U-Drill Sleeve Note) bove tooling system is our recommendation. A Depending on export condition, the standard tooling packed with the machine can be different.

Tool Interference Diagram PUMA VT450 / VT450-2SP (X-axis Travel) (X-axis Travel)

385 (15.2) (X-axis Travel) 12 inch Working Range PUMA VT450M / VT450M-2SP Unit: mm (inch)

Working Range Unit: mm (inch)

External Dimensions PUMA VT450 / VT450M / PUMA VT450-2SP / VT450M-2SP Top View PUMA VT750 / VT750M PUMA VT750-2SP / VT750M-2SP Top View Chip Conveyor Rear (Option) 585 (23.0) Chip Conveyor Right (Option) Chip Conveyor Left (Option) Chip Conveyor Right (Option) Chip Conveyor Left (Option) Chip Conveyor Rear (Option) Chip Conveyor Rear (Option) Chip Conveyor Rear (Option) Front View Chip Conveyor Left (Option) Chip Conveyor Right (Option) Chip Conveyor Right (Option) Chip Conveyor Left (Option) Side View Side View Chip Conveyor Rear (Option) Chip Conveyor Rear (Option)