video corpo

PUMA HT / QL series
28Pages

{{requestButtons}}

Catalog excerpts

PUMA HT / QL series - 1

PUMA HT/QLseries Twin Spindle Turning Center & Gantry Loader series

Open the catalog to page 1
PUMA HT / QL series - 2

Two Spindle, 4-axes Turning Center Realizes Twice the Productivity

Open the catalog to page 2
PUMA HT / QL series - 3

Integral CNC Gantry Loader Ensures Versatile Automation and High Productivity

Open the catalog to page 3
PUMA HT / QL series - 4

Main Spindle PUMA HT230T / HT230TG series ( 6"class ) Max. spindle speed PUMA H250T / QL200H series ( 8"class ) Max. spindle speed PUMA H310T / QL300H series ( 10"class ) Max. spindle speed C-axis control of main spindle C-axis index 360˚ ( in 0.001˚increment ) C-axis braking torque Main spindle is supported by high precision bearing combination with large diameter. All spindle bearing are lubricated by grease. C-axis contouring provides main spindle positioning in increments of 0.001degree. Three dimensional contouring, complex round and prismatic machining, square shoulder and lettering...

Open the catalog to page 4
PUMA HT / QL series - 5

Main Spindle Power-torque Diagram PUMA HT230T Max. spindle speed : 6000 r/min • Motor power : 11 kW ( 14.8 Hp ) Max. spindle speed : 4500 r/min • Motor power : 11 kW ( 14.8 Hp ) Torque : N·m (ft·lb) 100 (73.8) Max. spindle speed : 4500 r/min Motor power : 15 kW ( 20.1 Hp ) Spindle Speed (r/min) Spindle Speed (r/min) Spindle Speed (r/min) Max. spindle speed : 4500 r/min • Motor power : 7.5 kW ( 10.1 Hp ) Torque : N·m (ft·lb) Max. spindle speed : 6000 r/min • Motor power : 7.5 kW ( 10.1 Hp ) Output : kW (Hp) Max. spindle speed : 4500 r/min Motor power : 15 kW ( 20.1 Hp ) Spindle Speed (r/min)...

Open the catalog to page 5
PUMA HT / QL series - 6

The heavy duty design provides unsurpassed rigidity for heavy stock removal, fine surface finishes, Turning tools are securely attached to the turret by wedge clamps. Index time ( 1-station swivel ) H310T [TM] / QL300H [HM] : 0.35 S 2 axis V10 turret No.of tool station Rotary tool spindle power-torque diagram Total 24 tool stations turret ( VDI ) make it possible to complete complicated parts requiring many tools in just one set-up. Max. tool spindle speed : 3000 r/min Torque : N·m (ft·lb) •40 (53.6) power : 3 kW ( 4.0 Hp ) Motor • Intermittent operating Intermittent operating 100 200 Speed...

Open the catalog to page 6
PUMA HT / QL series - 7

Machine Construction Exclusive bed design provides exceptional accessibility to the chuck for convenient loading / unloading of parts. Separated left and right bed minimizes the effect of vibration in various cutting conditions and realize the high reliability. All guide ways are wide wrap-around rectangular type for unsurpassed longterm rigidity and accuracy Working Range A : Max.turning dia. 165 mm ( 6.5 inch ) ( HT230T ) 200 mm ( 7.9 inch ) ( H250T / TM ) 230 mm ( 9.1 inch ) ( H310T / TM ) ØA B Left and Right side have the same working capacity.

Open the catalog to page 7
PUMA HT / QL series - 8

Gantry Loader Application Twin spindles and Twin turrets The machine realizes high productivity From transmissions to four corner components which have any different shape, size and capacity are capable to be manufactured by Gantry Loader System. FOUR CORNERS Differential Case Variation of Gantry Loader Application (PUMA HT230TG / QL200H [HM] / QL300H [HM]) (•Loading position, • Unloading postion)

Open the catalog to page 8
PUMA HT / QL series - 9

Gantry Loader Axis travel of Gantry loader* Servo driven CNC gantry loader PUMA HT230TG / QL200H [HM] / QL300H [HM] : 3-axis Servo driven ( X, Y, Z ) Max. G-Loader Handling Size ( Max. turning dia.×Max. turning length ) PUMA HT230TG Z-axis 180 / 200 / 200 mm ( 7.1 / 7.9 / 7.9 inch ) * : Axis travel of gantry loader is for A1-type gantry loader application Swivel type gripper head Wrist swivel angle : 180˚ Ergonomic Design Accessibility Easy chip disposal A large capacity chip pan is installed separately from the machine bed so that heat generated by cut chips will not distort the bed. The...

Open the catalog to page 9
PUMA HT / QL series - 10

Tooling System unit : mm ( inch ) PUMA HT230T / HT230TG O.D and facing (Rough) 25 Face tool holder PUMA H250T / QL200H O.D and facing (Rough) 25 Face tool holder Note) Above tooling system is our recommendation. Depending on export condition, the standard tooling packed with the machine can be different.

Open the catalog to page 10
PUMA HT / QL series - 11

O.D and facing (Rough) 25 O.D Tool Holder (Right) O.D and facing (Finish) 25 O.D Tool Holder (Left) Face Tool Holder 10 Station Turret Drill Socket MT#1 MT#3 MT#2 MT#4 ID Tool Holder Note) bove tooling system is our recommendation. Depending on export condition, A the standard tooling packed with the machine can be different.

Open the catalog to page 11
PUMA HT / QL series - 12

Tooling System unit : mm ( inch ) PUMA H250TM / QL200HM O.D Tool 20 O.D Tool Holder Face Tool Holder Rotary Tool Reamer Straight Milling Head Angular Milling Head End Mill Note) Above tooling system is our recommendation. Depending on export condition, the standard tooling packed with the machine can be different.

Open the catalog to page 12
PUMA HT / QL series - 13

PUMA H310TM / QL300HM O.D Tool 20 O.D. Holder (CW) Face Tool 20 Facing Holder (CCW) Boring Bar Boring Sleeve Boring Holder (Back) Rotary Tool Reamer Straight Milling Head (H85) Angular Milling Head Note) Above tooling system is our recommendation. Depending on export condition, the standard tooling packed with the machine can be different.

Open the catalog to page 13
PUMA HT / QL series - 14

Tool Interference Diagram unit : mm ( inch )

Open the catalog to page 14
PUMA HT / QL series - 16

Working Range unit : mm ( inch ) Face Cutting Axis Travel

Open the catalog to page 16
PUMA HT / QL series - 18

Working Range PUMA H310T / QL300H unit : mm ( inch ) Axis Travel Face Cutting

Open the catalog to page 18
PUMA HT / QL series - 19

Straight milling head Angular milling head Face Cutting Axis Travel

Open the catalog to page 19
PUMA HT / QL series - 20

Angular milling head 88 (3.5) Face Cutting Working Range unit : mm ( inch ) Axis Travel Straight milling head

Open the catalog to page 20
PUMA HT / QL series - 21

External Dimension unit : mm ( inch ) EMERGENCY STOP EMERGENCY STOP Front View Side View Front View

Open the catalog to page 21
PUMA HT / QL series - 22

External Dimension unit : mm ( inch ) Side View Front View This picture is for A1-type gantry loader application EMERGENCY STOP EMERGENCY STOP

Open the catalog to page 22
PUMA HT / QL series - 23

This picture is for A1-type gantry loader application Front View This picture is for A3-type gantry loader application Side View

Open the catalog to page 23
PUMA HT / QL series - 24

Machine Specifications Description Recommendable turning dia. mm ( inch ) X / Z-axis rapid traverse Distance of spindle centers Capacity Spindle nose Spindle Spindle bearing dia. ( front ) ( Left / Right ) Spindle bore dia. C-axis indexing Turret type No. of tool station Turret Rotary tool spindle speed ( Max. ) Main spindle motor Coolant pump Servo motor ( X / Z-axis ) Rotary tool spindle motor ( 15min. ) Boring bar dia. ( Max. ) Indexing time ( 1-station swivel ) Electric power supply Power source ( Rated capa. ) Machine Dimensions HT series Standard Feature Optional Feature • Chuck clamp...

Open the catalog to page 24

All DN SOLUTIONS catalogs and technical brochures

  1. PUMA 4100/5100

    32 Pages

  2. PUMA GT series

    36 Pages

  3. PUMA MX series

    36 Pages

  4. PUMA TW series

    28 Pages

  5. Lynx 2100G

    4 Pages

  6. LEO 1600

    8 Pages

  7. NHP 4000/5000

    20 Pages

  8. DNM 400a

    4 Pages

  9. NHP series

    28 Pages

  10. HC II series

    20 Pages

  11. PUMA V8300

    4 Pages

  12. PUMA T W2600

    20 Pages

  13. VC 3600

    4 Pages

  14. DMP 500/2SP

    4 Pages

  15. T 4000 series

    20 Pages

  16. T 3600D

    4 Pages

  17. PUMA ST series

    28 Pages

  18. BM 2740U

    4 Pages

  19. PUMA VT series

    24 Pages

  20. PUMAGT series

    24 Pages

  21. Lynx 220, 220L

    20 Pages

  22. DCM series

    20 Pages