

Catalog excerpts

Technical data sheet - TESNIT® BA-R301 TESNIT® BA-R301 This durable gasket material is formulated for high-temperature applications in exhaust systems. It exhibits superior stability during exposure to heat and dynamic loads and is especially suitable for big diesel engines and turbochargers. The unique manufacturing process enables economically ideal formats and endless rolls. In addition, due to the specially designed reinforcement, the material can be flash-cut. APPROPRIATE INDUSTRIES & APPLICATIONS AUTOMOTIVE AND ENGINE BUILDING INDUSTRIES STEAM SUPPLY Mineral fibers, inorganic fillers, NBR binder, twill weave wire mesh reinforcement. Sheet dimensions Size (mm): 1500 x 1400 | 1000 x 1400 Rolls (mm): 1450 x 11250 | 1450 x 22500 Thickness (mm): | 1.0 | 1.5 | 2.0 Other sizes and thicknesses available on request Length and width: ± 5 % Thickness ≤ 1.0 mm: ± 0.1 mm Thickness > 1.0 mm: ± 10 % Surface finish Standard: 2G. Optional: graphite or PTFE TECHNICAL DATA Typical values for 2 mm thickness Density Compressibility Recovery Tensile strength Residual stress 50 MPa, 175°C, 16 h 50 MPa, 300°C, 16 h Specific leak rate Thickness increase Oil IRM 903, 150°C, 5 h ASTM Fuel B, 23°C, 5 h Compression modulus At room temperature: εKSW At elevated temperature: εWSW/200°C Creep relaxation At room temperature: εKRW Maximum operating conditions Peak temperature Continuous temperature Continuous temperature with steam Pressure °C/°F °C/°F °C/°F bar/psi
Open the catalog to page 1
Technical data sheet - TESNIT® BA-R301 CHEMICAL RESISTANCE CHART The recommendations made here are intended as a guideline for the selection of a suitable gasket type. As the function and durability of products are dependent upon a number of factors, the data may not be used to support any warranty claims. If there are specific type-approval regulations, these have to be complied with. Legend: Recommendation depends on operating conditions, Calcium hydroxide Sodium chloride Sodium cyanide Acetic acid, 100% (Glacial) Fruit juices Sodium hydroxide Sodium hypochlorite (Bleach) Sodium silicate...
Open the catalog to page 2All DONIT TESNIT catalogs and technical brochures
-
GRAFILIT® SP-Pure
2 Pages
-
TESNIT® BA-KTW-G
2 Pages
-
TESNIT® BA-C
2 Pages
-
TESNIT® BA-202 ECO
2 Pages
-
DONIFLEX® G-U Gasket Sheet
2 Pages
-
Ring Type Joints
44 Pages
-
Tesnit BA SOFT
2 Pages
-
Grafilit SP 05
2 Pages
-
Tesnit BA 202
2 Pages
-
Tesnit BA R
2 Pages
-
Tesnit BA GL
2 Pages
-
Tesnit BA CF
2 Pages
-
Tesnit BA U
2 Pages
-
Tesnit BA 55
2 Pages
-
Tesnit BA 203
2 Pages
-
TESNIT BA-SOFT Gasket Sheet
2 Pages
-
MICALIT P Gasket Sheet
1 Pages
-
MICALIT F Gasket Sheet
1 Pages
-
DONIFLON 2030 Gasket Sheet
2 Pages
-
DONIFLON 2020 Gasket Sheet
2 Pages
-
DONIFLON 2010 Gasket Sheet
2 Pages
-
DONIFLON 900E Gasket Sheet
2 Pages
-
DONIFLEX C Gasket Sheet
2 Pages
-
GRAFILIT SF Gasket Sheet
2 Pages
-
GRAFILIT SL Gasket Sheet
2 Pages
-
GRAFILIT SP Gasket Sheet
2 Pages
-
GRAFILIT EM Gasket Sheet
2 Pages
-
TESNIT BA-302 Gasket Sheet
2 Pages
-
TESNIT BA-300 Gasket Sheet
2 Pages
-
TESNIT BA-REM Gasket Sheet
2 Pages
-
TESNIT BA-R Gasket Sheet
2 Pages
-
TESNIT BA-GL Gasket Sheet
2 Pages
-
TESNIT BA-M Gasket Sheet
2 Pages
-
TESNIT BA-U Gasket Sheet
2 Pages
-
TESNIT BA-CF Gasket Sheet
2 Pages
-
TESNIT BA-55 Gasket Sheet
2 Pages
-
TESNIT BA-50 Gasket Sheet
2 Pages
-
TESNIT BA-203 Gasket Sheet
2 Pages
-
TESNIT BA-202 Gasket Sheet
2 Pages