0DONIT GRAFILIT® SP is an expanded graphite based material with tanged stainless steel insert, thus enhances the surface load and blowout safety. GRAFILIT® SP has excellent chemical, thermal, and mechanical resistance. GRAFILIT® SP is gasket material used in wide range of industries, as gas and steam supply chemical and petrochemical industry. MECHANICAL THERMAL RESISTANCE RESISTANCE APPROPRIATE INDUSTRIES & APPLICATIONS SUPERIOR EXCELLENT VERY GOOD GOOD MODERATE GENERAL PURPOSE WATER SUPPLY POTABLE WATER SUPPLY STEAM SUPPLY GAS SUPPLY CHEMICAL INDUSTRY PETROCHEMICAL INDUSTRY PAPER AND CELLULOSE INDUSTRY AUTOMOTIVE AND ENGINE BUILDING INDUSTRY SHIPBUILDING POWER PLANT REFRIGERATION AND COOLING HEATING SYSTEMS HIGH TEMP. APPLICATIONS COMPRESSORS AND PUMPS VALVES TECHNICAL DATA Typical values for a thickness of 1.5 mm P-T DIAGRAMS Demanding gasses 200 -- Steam, gasses

EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 1.5 mm P-T diagrams indicate the maximum permissible combination of internal pressure and service temperature which can be simultaneously applied for a given gasket according its material type, thickness, size and tightness class. Given the wide variety of gasket applications and service conditions, these values should only be regarded as guidance for the proper gasket assembly. In general, thinner gaskets exhibit better P-T properties. J G eneral suitability - Under common installation practices and chemical compatibility. Limited suitability -...