GRAFILIT MULTIFORCE Gasket Sheet
2Pages

{{requestButtons}}

Catalog excerpts

GRAFILIT MULTIFORCE Gasket Sheet - 1

DONIT GRAFILIT® MultiForce is an expanded high-purity graphite gasket sheet with multiple stainless steel foil reinforcements, facilitating thus its handling and cutting, and allowing increased surface load. It has excellent chemical and thermal resistances, high creep resistance and high compressibility rendering it suitable for highly demanding conditions in chemical and petrochemical installations with hot and/or corrosive media. The combination of an oxidation inhibitor with a very low sulphur content makes this material the perfect solution for sealing applications in nuclear power plants. MECHANICAL THERMAL RESISTANCE RESISTANCE APPROPRIATE INDUSTRIES & APPLICATIONS EXCELLENT VERY GOOD SEALABILITY CHEMICAL PERFORMANCE RESISTANCE CHEMICAL INDUSTRY PETROCHEMICAL INDUSTRY NUCLEAR POWER PLANTS HIGH-TEMPERATURE APP. HEATING SYSTEMS STEAM SUPPLY * WATER SUPPLY Al GAS SUPPLY REFRIGERATION & COOLING lit COMPRESSORS & PUMPS •** VALVES TECHNICAL DATA Typical values for a thickness of 2.0 mm (contains 3 inserts of 0.05 mm] P-T DIAGRAM EN 1514-1, Type IBC, PN 40, DIN 28091-2/3.8, 2.0 mm ■ General suitability - Under common installation practices and chemical compatibility. Limited suitability - Technical consultation is mandatory. P-T diagram indicates the maximum permissible combination of internal pressure and service temperature which can be simultaneously applied for a given gasket's thickness, size and tightness class. Given the wide variety of gasket applications and service conditions, these values should only be regarded as a guidance for the proper gasket assembly. In general, thinner gaskets exhibit better P-T properties.

Open the catalog to page 1
GRAFILIT MULTIFORCE Gasket Sheet - 2

Size (mm): 1000 x 1000 I 1500 x 1500 Thickness (mm): 1.0 I 1.5 I 2.0 I 3.0 Other sizes and thicknesses are available on request Acetamide Oleic acid CHEMICAL RESISTANCE CHART The recommendations made here are intended as a guideline for the selection of a suitable gasket material. As the product functionality and durability depend upon a number of factors, the data may not be used to support any warranty claims. If there are specific type-approval regulations, these have to be complied with. * Recommended o Recommendation dependent on operating conditions - Not recommended Qdonit® Head...

Open the catalog to page 2

All DONIT TESNIT catalogs and technical brochures

  1. Tesnit BA R

    2 Pages

  2. Tesnit BA GL

    2 Pages

  3. Tesnit BA CF

    2 Pages

  4. Tesnit BA U

    2 Pages

  5. Tesnit BA 55

    2 Pages