Odonit* DONIFLON® 2030 is structurally enhanced PTFE gasket sheet filled with barium sulfate. It has outstanding chemical resistance to various media, same as DONIFLON® 900E; especially recommended for strong alkaline solutions under moderate temperatures and hydrofluoric acid (up to 48%). This material has enhanced creep performance compared to plain PTFE material. It is the ideal gasket material for equipment where higher bolt loads are required. APPROPRIATE INDUSTRIES & APPLICATIONS VALVES TECHNICAL DATA Typ ical values for 2 mm thickness P-T DIAGRAM EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm General suitability - Under common installation practices and chemical compatibility. Conditional suitability - Appropriate measures ensure maximum performance for joint design and gasket installation. Technical consultation is recommended. Limited suitability - Technical consultation is mandatory. P-T diagram indicates the maximum permissible combination of internal pressure and service temperature which can be simultaneously applied for a given gasket's thickness, size and tightness class. Given the wide variety of gasket applications and service conditions, these values should only be regarded as a guidance for the proper gasket assembly. In general, thinner gaskets exhibit better P-T properties.

Size (mm): 1500 x 1500 Thickness (mm): 1.5 | 2.0 | 3.0 Other sizes and thicknesses available on request. Acetamide Oleic acid CHEMICAL RESISTANCE CHART The recommendations made here are intended as a guideline for the selection of a suitable gasket type. As the function and durability of products depend upon a number of factors, the data may not be used to support any warranty claims. + Recommended ? Recommendation depends on operating conditions - Not recommended All information and data quoted are based upon decades of experience in the production and use of sealing elements. This data may...