With an advanced 6-pole encapsulated core and 65mm diameter, this series compact DC motors deliver high torque up to15.8N*m with maximum output power at 11.2KW. Thanks to the unique sealing configuration design, these motors are tested waterproof IP68 according to ingress protection class, and can be operated permanently underwater and applied in dusty environments. We can also customize the winding to perfectly match your voltage, current, and maximum operating speed. Special shaft, cables and connectors are available upon request. Advantages Robust & durable: Outer shell in black anodizing aluminum alloy, prevent corrosion& oxidation. High performance: Provide extremely high torques with a minimum of power consumption. Silient: low-cogging electro-magnetic & dynamically balanced rotor, silient and smooth operation. Efficiency: Energy-efficient motors save energy and costs, efficiency up to 90%. Compact: High efficiency and high power density realized in a compact design. Ball-bearing: Double seal ball bearings with moisture resistant grease for long life. Cooling solution: water-cooling, liquid-cooling & Air-Cooling optional. Shaft in SS316 Steel: withstand redial/axile stress,and work in sea water against corrosion. Diameter Surface: D-cut, Cross-bore, Key 6. Special Front / Rear Cover Shape: Hollow, Threaded 5. Special Ball Bearing Rated voltage / Current Speed / Temperature Range Special Connector Dongguan Hobiba Technology Co.,Ltd 2-F, Building 6, Dazhou Industrial Zone, Shijie Town,523291, Dongguan City, Guangdong, China Telephone: +86-769-86370990 E-Mail: [email protected] Web: en.hobiba.cn Inrunner Motor

Motor Specification 1. The Max continuous working current tester conducted under circumstance of 20°C clean water. 2. Motors are tested waterproof under clean water free from foreign particles, otherwise waterproof property tend to descrease. 3. Maintenance and cleaning should be conducted after every 200 hours working underwater. 4. Motor case made in harden black anodized aluminum alloy, this offer superior corrosion resistance against salty seawater. Damage or sharp scrapper on the surface accidentally happen, the motor case tend to corrode soon. 5. Recommend to test dynamic balance after...

Inrunner Motor Wiring diagram Connecting to sensored motor: Connecting to sensorless motor: The A/B/C wires connectors must connect to the corresponding A/B/C ports on the motor respectively. Also connect the ESC sensor port to the motor sensor port via the stock 7-pin sensor Wire Otherwise, your cable. Connection: ESC will work in sensorless mode even if you’re using a sensored motor. Connect the 3 wires (A/B/C) from the ESC to the motor wires in any order. In the event the motor spins the wrong direction, swap any two wires, or change the setting value on the ESC. Motor Phase Motor Thermal...

Inrunner Motor Gearless use Auto Dyno Tester - at 100KV-60V-13N Auto Dyno Tester - at 120KV-60V-15N Dongguan Hobiba Technology Co.,Ltd 2-F, Building 6, Dazhou Industrial Zone, Shijie Town,523291, Dongguan City, Guangdong, China Telephone: +86-769-86370990 E-Mail: [email protected] Web: en.hobiba.cn