Inrunner Motor Description With an advanced 10-pole encapsulated core and 107mm diameter, this series compact DC motors deliver high torque up to 55 N.M with maximum output power at 30KW. Thanks to the unique sealing configuration design, these motors are tested waterproof IP68 according to ingress protection class, and can be operated permanently underwater and applied in dusty environments. We can also customize the winding to perfectly match your voltage, current, and maximum operating speed. Special shaft, cables and connectors are available upon request. Advantages Robust & durable: Outer shell in black anodizing aluminum alloy, prevent corrosion& oxidation. High performance: Provide extremely high torques with a minimum of power consumption. Silient: low-cogging electro-magnetic & dynamically balanced rotor, silient and smooth operation. Efficiency: Energy-efficient motors save energy and costs, efficiency up to 90%. Compact: High efficiency and high power density realized in a compact design. Ball-bearing: Double seal ball bearings with moisture resistant grease for long life. Cooling solution: water-cooling, liquid-cooling & Air-Cooling optional. Shaft in SS316 Steel: withstand redial/axile stress,and work in sea water against corrosion. Diameter Surface: D-cut, Cross-bore, Key 6. Special Front / Rear Cover Shape: Hollow, Threaded 5. Special Ball Bearing Rated voltage / Current Speed / Temperature Range Special Connector Dongguan Hobiba Technology Co.,Ltd 2-F, Building 6, Dazhou Industrial Zone, Shijie Town,523291, Dongguan City, Guangdong, China Telephone: +86-769-86370990 E-Mail: [email protected] Web: en.

Inrunner Motor Motor Specification Variants D107L165-160 Speed Constant KV(RPM/V) 160 Maximum Output Power (KW) 31.0 Winding turn & connection 2.5T LiPO/voltage Range 6-14S (20-58.8V) Max RPM 9,408 Continuous working current(A) Construction Cooling Solution Water cooling +air cooling Shaft extension Lead wires extension Insulation volt. & Leak Current Life Span(hrs) 1. The Max continuous working current tester conducted under circumstance of 20°C clean water. 2. Motors are tested waterproof under clean water free from foreign particles, otherwise waterproof property tend to descrease. 3. Maintenance...

Inrunner Motor Wiring diagram Connecting with sensored motor The A/B/C wires connectors must connect to the corresponding A/B/C ports on the motor respectively. Alsoconnect the ESC sensor port to the motor sensor port via the stock 7-pin sensor cable. Otherwise, your ESC will work in sensorless mode even if you’re using a sensored motor. Connecting with sensorless motor Connect the 3 wires (A/B/C) from the ESC to the motor wires in any order. In the event the motor spins the wrong direction, swap any two wires, or change the setting value on the ESC. Motor Phase Motor Thermal resistor for sensorless...

Inrunner Motor Auto Dyno Tester at 85Kv-60V-36N M_Input Power(W) Synthesis Efficiency(%) M_Power M_Frequency M_ M_Speed M_Torque M_Output Factor (Hz) Efficiency(%) (rpm) (N*m) Power(W) C_Efficiency M_Voltage M_Current C_Power Factor C_Input Power(W) Item C_Voltage C_Current Dongguan Hobiba Technology Co.,Ltd 2-F, Building 6, Dazhou Industrial Zone, Shijie Town,523291, Dongguan City, Guangdong, China Telephone: +86-769-86370990 E-Mail: [email protected] Web: en.hobib