Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Dongguan Koves Cutting Tool Co., Ltd.
  3. WD type grooving tools & carbide tips

WD type grooving tools & carbide tips

WD type grooving tools & carbide tips
1 / 12 PagesView full catalog

WD type grooving tools & carbide tips

Product catalog summary
Overview: The document details KOVES' modular part-off and grooving tools, focusing on their design, specifications, and applications. These tools are optimized for both external and face grooving, enhancing applicability and cost efficiency.

Specifications: Featuring an independent tool holder design, these tools improve applicability and reduce cutting tool costs by about 30%. They provide strong and stable clamping force, facilitating the simultaneous installation and replacement of carbide inserts and cutter holders.

Tool Geometry: Designed with soft cutting geometry, the tools are ideal for low to medium strength materials, ensuring effective swarf control and formation. They are suitable for machining steel, stainless steel, and thin-walled components. For medium to high strength materials, a geometry with a small negative chamfer is employed.

Chipbreakers: The chipbreakers offer smooth cutting shapes with low cutting force, suitable for materials within low to medium strength ranges. They minimize built-up edge and are effective for thin-walled workpieces.

Product Range: The document includes various types and models of blades and tool holders, detailing dimensions, weight, and pricing. It covers both external and face grooving blades with specific measurements for each type.

Applications: These tools are applicable in diverse machining environments, particularly under stable cutting conditions for all steels, stainless steel, and cast iron. They are preferred for stable cutting conditions.

Additional Features: The document also highlights spare parts like screws and wrenches, emphasizing ease of maintenance and replacement.
See more

Catalog excerpts

WD type grooving tools & carbide tips-1

KOVES 科维丝工具 KOVES Part-off and grooving system Moular part-off and grooving tools Blades >> For external >> For face grooving Par-off block

 Open the catalog to page 1
WD type grooving tools & carbide tips-2

WD模块式切槽刀 WD Moular part-off and grooving tools 因为采用独立刀座设计,与现存一体式刀具相比: 适用性和经济性得到提高! 可以替换的刀座: 可根据工件类型改变安装方式减少刀具切削成本30%左右 强大稳固的夹紧力: 刀片和刀座刀座安装可同时进行安装和更换很方便 稳固的安装系统: 安装简便,加紧力强. Because of using independent tool holder design, Compared with existing integrated tool: The Applicability and economy are improved! Replace able cutter holder: You can change the type of installation according to the workpiece, the cutting tool costs can be reduced by about 30% Strong and Stable clamping force: the carbide insert and cutter holder can be installed at the same time, installation and replacement are very convenient...

 Open the catalog to page 2
WD type grooving tools & carbide tips-3

WD Moular part-off and grooving tools HWDR/L.. Blades >> For externalType B HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL

 Open the catalog to page 3
WD type grooving tools & carbide tips-4

WD Moular part-off and grooving tools mm^rn^rn hfdr/l3oo.. Blades >> For face grooving Dmin Dmax HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER

 Open the catalog to page 4
WD type grooving tools & carbide tips-5

Dmin Dmax Inserts W Tmax L f Dmin-Dmax Apply for HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL

 Open the catalog to page 5
WD type grooving tools & carbide tips-6

Dmin Dmax Inserts W Tmax L f Dmin-Dmax Apply for HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL HDL/HER HDR/HEL

 Open the catalog to page 6
WD type grooving tools & carbide tips-7

WD Moular part-off and grooving tools MME^HDR/L.. Part-off block S'n^® Mm J^'(/i'TyPe h b H L Li hi Apply for (kg) (RMB) HDR2020K 20 20 20 110 32 12 HWDR/HFDL 0.60 172.00

 Open the catalog to page 7
WD type grooving tools & carbide tips-8

WD Moular part-off and grooving tools I^SJ! HER/L.. Part-off block S'n J® Mm J^'(/i'TyPe h b H L Li hi Apply for (kg) (RMB) HER2020K 20 20 20 110 32 12 HWDR/HFDL 0.60 218.00

 Open the catalog to page 8
WD type grooving tools & carbide tips-9

WDTool holder >> for external ^ nx sm ^Type W H B L T Screw Wrench Inserts (kg) (RMB) TWDR1212K-2T12 2 12 12 125 12 BS0407 LT15 WD22N2.00.. 0.16 280.00

 Open the catalog to page 9
WD type grooving tools & carbide tips-10

^ nx sm ^Type W D F F1 L1 L2 Dmin Screw Wrench Inserts (kg) (RMB TIWDR2025-2T06 2 20 15 6 180 40 25 BX0520 LH040 WD22N2.00.. 0.46 340.00

 Open the catalog to page 10
WD type grooving tools & carbide tips-11

WDTool holder >> for face grooving WDFR/L.. Type W D T L1 Dmin Screw Wrench Inserts (kg) (RMB)

 Open the catalog to page 11
WD type grooving tools & carbide tips-12

as ^W L R H A Grade (RMB) KP2130 DOWNLOAD fiffiT^PDF#* KOVES INDUSTRY CO.,LTD DONGGUAN KOVES PRECISION TOOLS CO.,LTD No.33 Xing’er Road,Wusha District,Chang’an Town, Dongguan City,China Tel:86-0769-81 50481 6 Fax:86-0769-81504815 Http://www.kovestool. cn E-mail:koves@kovestool. com

 Open the catalog to page 12

All Dongguan Koves Cutting Tool Co., Ltd. catalogs and technical brochures

  1. Carbide inserts 2018 catalog
    Carbide inserts 2018 catalog

    112  Pages

  2. CBN and PCD inserts promotion list
    CBN and PCD inserts promotion list

    1  Page

  3. PCD diamond inserts and tools
    PCD diamond inserts and tools

    25  Pages

  4. CBN inserts and tools
    CBN inserts and tools

    27  Pages

  5. WNMM PCD DIAMOND INSERT
    WNMM PCD DIAMOND INSERT

    1  Page

  6. WBMT PCD DIAMOND INSERT
    WBMT PCD DIAMOND INSERT

    1  Page

  7. WBGW PCD DIAMOND INSERT
    WBGW PCD DIAMOND INSERT

    1  Page

  8. VNMM PCD DIAMOND INSERT
    VNMM PCD DIAMOND INSERT

    1  Page

  9. VCMT PCD DIAMOND INSERT
    VCMT PCD DIAMOND INSERT

    1  Page

  10. VCGW PCD DIAMOND INSERT
    VCGW PCD DIAMOND INSERT

    1  Page

  11. VBMT PCD DIAMOND INSERT
    VBMT PCD DIAMOND INSERT

    1  Page

  12. VBGW PCD DIAMOND INSERT
    VBGW PCD DIAMOND INSERT

    1  Page

  13. TPMT PCD DIAMOND INSERT
    TPMT PCD DIAMOND INSERT

    1  Page

  14. TPGW PCD DIAMOND INSERT
    TPGW PCD DIAMOND INSERT

    1  Page

  15. TPGN PCD DIAMOND INSERT
    TPGN PCD DIAMOND INSERT

    1  Page

  16. TNMM PCD DIAMOND INSERT
    TNMM PCD DIAMOND INSERT

    1  Page

  17. TCMT PCD DIAMOND INSERT
    TCMT PCD DIAMOND INSERT

    1  Page

  18. TCGW PCD DIAMOND INSERT
    TCGW PCD DIAMOND INSERT

    1  Page

  19. TBMT PCD DIAMOND INSERT
    TBMT PCD DIAMOND INSERT

    1  Page

  20. TBGW PCD DIAMOND INSERT
    TBGW PCD DIAMOND INSERT

    1  Page

  21. SPGN PCD DIAMOND INSERT
    SPGN PCD DIAMOND INSERT

    1  Page

  22. SEKT PCD DIAMOND INSERT
    SEKT PCD DIAMOND INSERT

    1  Page

  23. PSBR PCD DIAMOND INSERT
    PSBR PCD DIAMOND INSERT

    1  Page

  24. MGGN PCD DIAMOND INSERT
    MGGN PCD DIAMOND INSERT

    1  Page

  25. DNMM PCD DIAMOND INSERT
    DNMM PCD DIAMOND INSERT

    1  Page

  26. DCMT PCD DIAMOND INSERT
    DCMT PCD DIAMOND INSERT

    1  Page

  27. DCGW PCD DIAMOND INSERT
    DCGW PCD DIAMOND INSERT

    1  Page

  28. CNMM PCD DIAMOND INSERT
    CNMM PCD DIAMOND INSERT

    1  Page

  29. CCMT PCD DIAMOND INSERT
    CCMT PCD DIAMOND INSERT

    1  Page

  30. CCGW PCD DIAMOND INSERT
    CCGW PCD DIAMOND INSERT

    1  Page

  31. APMT PCD DIAMOND INSERT
    APMT PCD DIAMOND INSERT

    1  Page

  32. WNGA PCBN DIAMOND INSERT
    WNGA PCBN DIAMOND INSERT

    1  Page

  33. WBGW PCBN DIAMOND INSERT
    WBGW PCBN DIAMOND INSERT

    1  Page

  34. VNGA PCBN DIAMOND INSERT
    VNGA PCBN DIAMOND INSERT

    1  Page

  35. VCGW PCBN DIAMOND INSERT
    VCGW PCBN DIAMOND INSERT

    1  Page

  36. VBGW PCBN DIAMOND INSERT
    VBGW PCBN DIAMOND INSERT

    1  Page

  37. TPGW PCBN DIAMOND INSERT
    TPGW PCBN DIAMOND INSERT

    1  Page

  38. TPGN PCBN DIAMOND INSERT
    TPGN PCBN DIAMOND INSERT

    1  Page

  39. TNGA PCBN DIAMOND INSERT
    TNGA PCBN DIAMOND INSERT

    1  Page

  40. SPGN PCBN DIAMOND INSERT
    SPGN PCBN DIAMOND INSERT

    1  Page

  41. SNGA PCBN DIAMOND INSERT
    SNGA PCBN DIAMOND INSERT

    1  Page

  42. PSBR PCBN DIAMOND INSERT
    PSBR PCBN DIAMOND INSERT

    1  Page

  43. MGGN PCBN DIAMOND INSERT
    MGGN PCBN DIAMOND INSERT

    1  Page

  44. DNGA PCBN DIAMOND INSERT
    DNGA PCBN DIAMOND INSERT

    1  Page

  45. DCMW PCBN DIAMOND INSERT
    DCMW PCBN DIAMOND INSERT

    1  Page

  46. CNGA PCBN DIAMOND INSERT
    CNGA PCBN DIAMOND INSERT

    1  Page

  47. CCMW PCBN DIAMOND INSERT
    CCMW PCBN DIAMOND INSERT

    1  Page

  48. ER Collet set 0.015mm 0.008mm 0.005mm
    ER Collet set 0.015mm 0.008mm 0.005mm

    2  Pages

  49. Thread insert KVX+ grade for high hardness
    Thread insert KVX+ grade for high hardness

    1  Page

  50. External Grooving tools with SP carbide tips
    External Grooving tools with SP carbide tips

    4  Pages

  51. PCD INSERT LIST
    PCD INSERT LIST

    4  Pages

  52. Carbide insert KC1125 grade for steel
    Carbide insert KC1125 grade for steel

    4  Pages

  53. Carbide insert KC3110 KC3120 grade for cast iron
    Carbide insert KC3110 KC3120 grade for cast iron

    4  Pages

  54. Carbide inserts H01 H02 grade for Aluminum
    Carbide inserts H01 H02 grade for Aluminum

    4  Pages

  55. 45HRC 4-12mm carbide end mills promotion list
    45HRC 4-12mm carbide end mills promotion list

    1  Page

  56. HPB230 Carbide ball mill 2F for steel helix30
    HPB230 Carbide ball mill 2F for steel helix30

    1  Page

  57. HPE235 Carbide flat mill 2F for steel helix35
    HPE235 Carbide flat mill 2F for steel helix35

    1  Page

  58. HPEL235 Carbide flat mill 2F long length for steel helix35
    HPEL235 Carbide flat mill 2F long length for steel helix35

    1  Page

  59. HPE435 Carbide flat mill 4F for steel helix35
    HPE435 Carbide flat mill 4F for steel helix35

    1  Page

  60. HPEL435 Carbide flat mill 4F long length for steel helix35
    HPEL435 Carbide flat mill 4F long length for steel helix35

    1  Page

  61. HPR435 Carbide radius mill 4F for steel
    HPR435 Carbide radius mill 4F for steel

    1  Page

  62. HMB230 Carbide ball mill 2F for steel and stainless steel helix30
    HMB230 Carbide ball mill 2F for steel and stainless steel helix30

    1  Page

  63. HME235 Carbide flat mill 2F for steel and stainless steel helix35
    HME235 Carbide flat mill 2F for steel and stainless steel helix35

    1  Page

  64. HMEL235 Carbide flat mill 2F long length for steel and stainless steel helix35
    HMEL235 Carbide flat mill 2F long length for steel and stainless steel helix35

    1  Page

  65. HME435 Carbide flat mill 4F for steel and stainless steel helix35
    HME435 Carbide flat mill 4F for steel and stainless steel helix35

    1  Page

  66. HMEL435 Carbide flat mill 4F long length for steel and stainless steel helix35
    HMEL435 Carbide flat mill 4F long length for steel and stainless steel helix35

    1  Page

  67. HME645 Carbide flat mill 6F for steel and stainless steel helix45
    HME645 Carbide flat mill 6F for steel and stainless steel helix45

    1  Page

  68. HMEL645 Carbide flat mill 6F long length for steel and stainless steel helix45
    HMEL645 Carbide flat mill 6F long length for steel and stainless steel helix45

    1  Page

  69. HMR435 Carbide radius mill 4F for steel and stainless steel helix35
    HMR435 Carbide radius mill 4F for steel and stainless steel helix35

    1  Page

  70. HMRE430 Carbide roughing mill 4F for steel and stainless steel helix30
    HMRE430 Carbide roughing mill 4F for steel and stainless steel helix30

    1  Page

  71. HMREL430 Carbide roughing mill 4F long length for steel and stainless steel helix30
    HMREL430 Carbide roughing mill 4F long length for steel and stainless steel helix30

    1  Page

  72. HYB230 carbide ball mill 2F for hardened steel 48-65HRC helix30
    HYB230 carbide ball mill 2F for hardened steel 48-65HRC helix30

    1  Page

  73. HYE235 carbide flat mill 2F for hardened steel 48-65HRC helix30
    HYE235 carbide flat mill 2F for hardened steel 48-65HRC helix30

    1  Page

  74. HYEL235 carbide flat mill 2F long length for hardened steel 48-65HRC helix35
    HYEL235 carbide flat mill 2F long length for hardened steel 48-65HRC helix35

    1  Page

  75. HYE435 carbide flat mill 4F for hardened steel 48-65HRC helix30
    HYE435 carbide flat mill 4F for hardened steel 48-65HRC helix30

    1  Page

  76. HYEL435 carbide flat mill 4F long length for hardened steel 48-65HRC helix35
    HYEL435 carbide flat mill 4F long length for hardened steel 48-65HRC helix35

    1  Page

  77. HYR435 carbide radius mill 4F for hardened steel 48-65HRC helix35
    HYR435 carbide radius mill 4F for hardened steel 48-65HRC helix35

    1  Page

  78. HSB230 Carbide ball mill 2F for stainless steel helix30
    HSB230 Carbide ball mill 2F for stainless steel helix30

    1  Page

  79. HSE435 Carbide flat mill 4F for stainless steel helix35
    HSE435 Carbide flat mill 4F for stainless steel helix35

    1  Page

  80. HSEL435 Carbide flat mill 4F long length for stainless steel helix35
    HSEL435 Carbide flat mill 4F long length for stainless steel helix35

    1  Page

  81. HSE235 Carbide flat mill 2F for stainless steel helix35
    HSE235 Carbide flat mill 2F for stainless steel helix35

    1  Page

  82. HSEL235 Carbide flat mill 2F long length for stainless steel helix35
    HSEL235 Carbide flat mill 2F long length for stainless steel helix35

    1  Page

  83. HSR435 Carbide radius mill 4F for stainless steel helix35
    HSR435 Carbide radius mill 4F for stainless steel helix35

    1  Page

  84. HRB230 Carbide rib ball mill 2F for high precision deep cavity processing helix30
    HRB230 Carbide rib ball mill 2F for high precision deep cavity processing helix30

    2  Pages

  85. HRE230 Carbide rib flat mill 2F for high precision deep cavity processing helix30
    HRE230 Carbide rib flat mill 2F for high precision deep cavity processing helix30

    2  Pages

  86. HRE430 Carbide rib flat mill 4F for high precision deep cavity processing helix30
    HRE430 Carbide rib flat mill 4F for high precision deep cavity processing helix30

    1  Page

  87. HRR230 Carbide rib radius mill 2F for high precision deep cavity processing helix30
    HRR230 Carbide rib radius mill 2F for high precision deep cavity processing helix30

    1  Page

  88. HRR430 Carbide rib radius mill 4F for high precision deep cavity processing helix30
    HRR430 Carbide rib radius mill 4F for high precision deep cavity processing helix30

    2  Pages

  89. ALB230 Carbide ball mill 2F for Aluminum helix30
    ALB230 Carbide ball mill 2F for Aluminum helix30

    1  Page

  90. ALE255 Carbide flat mill 2F for Aluminum helix55
    ALE255 Carbide flat mill 2F for Aluminum helix55

    1  Page

  91. ALEL255 Carbide flat mill 2F long length for Aluminum helix55
    ALEL255 Carbide flat mill 2F long length for Aluminum helix55

    1  Page

  92. ALE345 Carbide flat mill 3F for Aluminum helix45
    ALE345 Carbide flat mill 3F for Aluminum helix45

    1  Page

  93. ALEL345 Carbide flat mill 3F long length for Aluminum helix45
    ALEL345 Carbide flat mill 3F long length for Aluminum helix45

    1  Page

  94. ALR327 Carbide flat mill 3F for Aluminum helix27
    ALR327 Carbide flat mill 3F for Aluminum helix27

    1  Page

  95. DMRB230 Carbide ball mill 2F for Graphite helix30
    DMRB230 Carbide ball mill 2F for Graphite helix30

    1  Page

  96. DMRE230 Carbide flat mill 2F for Graphite helix30
    DMRE230 Carbide flat mill 2F for Graphite helix30

    1  Page

  97. DMRE430 Carbide flat mill 4F for Graphite helix30
    DMRE430 Carbide flat mill 4F for Graphite helix30

    1  Page

  98. DMREL430 Carbide flat mill 4F long length for Graphite helix30
    DMREL430 Carbide flat mill 4F long length for Graphite helix30

    1  Page

  99. DMRR230 Carbide radius mill 2F for Graphite helix30
    DMRR230 Carbide radius mill 2F for Graphite helix30

    1  Page

  100. DMRR430 Carbide radius mill 4F for Graphite helix30
    DMRR430 Carbide radius mill 4F for Graphite helix30

    1  Page

  101. DMRRL430 Carbide radius mill 4F long length for Graphite helix30
    DMRRL430 Carbide radius mill 4F long length for Graphite helix30

    1  Page

  102. PD3-KC1125 NEW SERIES CARBIDE INSERT FOR STEEL
    PD3-KC1125 NEW SERIES CARBIDE INSERT FOR STEEL

    9  Pages

  103. PC3-KC1125 for steel with high performance
    PC3-KC1125 for steel with high performance

    14  Pages

  104. CT30 SERIES MILLING INSERTS FOR STEEL AND STAINLESS STEEL
    CT30 SERIES MILLING INSERTS FOR STEEL AND STAINLESS STEEL

    2  Pages

  105. Carbide end mills 7 series for diffirent process
    Carbide end mills 7 series for diffirent process

    9  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.