Catalogs >
Dongguan Koves Cutting Tool Co., Ltd. >
Carbide inserts H01 H02 grade for Aluminum

Carbide inserts H01 H02 grade for Aluminum
4Pages

Catalog excerpts

Carbide inserts H01 H02 grade for Aluminum - 1

KOVES 科维丝工具 Alloy blade for turning milling of aluminium alloy 最适合铝铜与有色金属加工！ The most suitable copper and non-ferrous metal processing! 大前角波纹式容屑槽降低切削阻力上表面抛光处理——杰出的切削性能，减少积屑瘤产生，确保顺畅三维槽型设计，表面粗糙度更好切断刀片，沿用M/G槽型，性能优良 · Large front angle corrugated chip groove can reduce cutting resistance · Top surface polishing - exce

Open the catalog to page 1

Carbide inserts H01 H02 grade for Aluminum - 2

• # main grade and stock available produce according

Open the catalog to page 2

Carbide inserts H01 H02 grade for Aluminum - 3

• ±}tmain grade and stock available O produce according to the order

Open the catalog to page 3

Carbide inserts H01 H02 grade for Aluminum - 4

Cutting groove Nose Radius 安全使用注意事项加工时会出现高温切削飞散、排出切屑过长等情况,请使用安全罩壳及防护眼镜等防护工具,并务必注意防火、防灾。使用时请务必小心锋利刀尖。使用方法错误、使用条件不当时，会造成刀具崩损、飞散，请在推荐的范围内使用。使用非水溶性切削油的场合，为防止火灾意外，请配置自动灭火装置。 Very hot or lengthy chips may be discharged while the machine is in operation. Therefore, machine guards,safety goggles or other protective covers must be used. Fire safety precautions must also be considered. Please handle with care as this product has sharp edges. Improper cutting conditions or mis-handling of the tool may result in breakages or projectiles.Therefore,please use the tool within its recommended...

Open the catalog to page 4