Catalogs >
DONGGUAN ITM-LAB MACHINE INC. >
Warping lifetime Test Machine For Headset Band RS-6911A

Warping lifetime Test Machine For Headset Band RS-6911A
2Pages

Catalog excerpts

Warping lifetime Test Machine For Headset Band RS-6911A - 1

Name: Warping lifetime Test Machine For Headset Band Model: RS-6911A Application: The machine applies to warping lifetime of headset,and the extension test method is:after is fixed with clamp on right and left,it shall be pulled reversely to certain distance,and then be pulled to the opposite direction at the same time and back to start position at last,the test process can be set,Headset can be taken down for inspecting performance of its hesd band through N times test. Purpose: Motion control shall be conducted with MGCS TFT 7 inches of True Color LCD touch screen and Mitsubishi programmable logic controller,expansion process,test speed,test times and duration time of the motion can be set. Panasonic servo motor drive with synchronous belt drive,high speed and low noise,stable operation,stable,reliable and durable performance shall be used; Extension of 6 sets of headsets may be tested synchronously, the extension process is accurate and adjustable,the headset shall be clamped with Velcro,and the angle of clamp used for fixing is adjustable. Specification: Model Test speed Test stroke Size of main unit Power supply Name: Headphone Tensile Tester Model: RS-8008H Purpose: Apply for headphone tensile test,clamping the headphone,fasten one end of earphone, headband clamping on support rod,the other end of earphone fix on the fixture of the digital tensile gauge, control the screw ball move right,the digital tensile gauge will show the tension data(can reserve the max tension),by this way to check the relation between tensile distance and tension once user pull back the headphone onto the head. Specification: Measuring tension capacity Digital gauge resolution Load unit Measuring speed Measuring stroke Machine dimension Machine weight Power supply

Open the catalog to page 1

Warping lifetime Test Machine For Headset Band RS-6911A - 2

Name: Headphone Expansion Life Tester Model: RS-6910 Purpose: This tester is suitable for headband expansion life test, Test method is:afer the headphone two ends on right and left are clamped,extend them out on right and left to a certain distance and then back to initial position, Test stroke can be set,get down the earphone to check its headband property after certain test cycles. Specification: Model Driver mode Test stroke Test speed Test cycle Power supply Name: Headphone Torsion Life Tester Model: RS-8106C Purpose: This tester is suitable for headphone rotating shaft to do torsion...

Open the catalog to page 2