ITM-LAB MACHINE INC. 总部地址：广东省东莞市桥头镇桥新东路 32 号 TEL: 86 769 83428055 Specification of High Temperature Chamber MODEL:DHG-480L Technical indicators: 1. Product High temperature aging test box name product model design standards 2. Specimen This test equipment is prohibited. limitation Test or storage of samples of flammable, explosive and volatile substances Test or storage of corrosive material samples Test or storage of biological samples Prevent electromagnetic interference above 3KHz-4KHz 3. Volume and size 3.1. Nominal 480L content volume 3.2. Estimation of 800W*1000H*600mmD inner box size 4. Performance 4.1. environmental conditions The temperature is 5 ~ 35℃, the relative humidity is less than or equal to 85% RH, There is no sample in the test box. Temperature test equipment 4.4 Heating time 4.5. Meet the test standard Within 30 min from room temperature to 100℃ (no load) GB/T2423.2-2001 test b: high temperature test method GB/T2423.3-2006 test b: high temperature test method GJB150.3-1986 High temperature test 5. Structural features 5.1. Thermal Integral design insulati

ITM-LAB MACHINE INC. 总部地址：广东省东莞市桥头镇桥新东路 32 号 TEL: 86 769 83428055 Heat preservation material: high-density rock wool heat preservation, insulation layer thickness 50mm. Door seal: food-grade silicone sealing strip, temperature resistant to 300℃ Door opening setting of a single aging box Observation window: 400×300mm tempered glass, installed on the door of the box. Temperature at door and upwind joint ≤ room temperature +20℃ 5.2. Air conditioning channel 5.3. Control panel (independently installed control cabinet) 5.4. room Fan, heater, orifice air supply duct Temperature control display screen,...

ITM-LAB MACHINE INC. 总部地址：广东省东莞市桥头镇桥新东路 32 号 TEL: 86 769 83428055 Temperature: adjusted according to the temperature working range of the equipment (upper limit +5℃, lower limit -5℃) resolution ratio Communicatio n function (optional) Control mode RS-485 interface, with local and remote communication functions (RAS-2003 monitoring software, RS-485 converter and COM port of PC) Anti-integral saturation PID BTC Balanced Temperature Control Mode (Temperature Test Equipment) Accessory function Overtemperature alarm Warm to time End of program standby function 8. Safety protection device Adjustable...

ITM-LAB MACHINE INC. 总部地址：广东省东莞市桥头镇桥新东路 32 号 TEL: 86 769 83428055 Air pressure: 86 ~ 106 kPa AC380V three-phase four-wire+protective ground wire; Allowable voltage fluctuation range: AC (1 10%) 380 V 13 power condition supply supply Allowable frequency fluctuation range: (1 1%) 50hz power The grounding resistance of protective ground wire is less than 4ω; TN-S power supply or TT power supply The user is required to configure the air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be used independently and exclusively for this equipment....