Specifications of high temperature aging test chamber MODEL: DHG-1400L Technical indicators:! 1.Product name Product number design standards High temperature aging test chamber DHG-1400L GB2423.1-89,

This test equipment prohibits Testing or storage of flammable, explosive and volatile material samples Testing or storage of samples of corrosive substances Testing or storage of biological samples Prevent electromagnetic interference above 3KHz-4KHz 3. Volume and size 3.1. Nominal internal volume Width 1400mm* Height 1580mm* Depth 600mm, double doors 4. Performance 4.1. Test environmental conditions 4.2. Test method 4.3. Temperature range 4.4 Temperature Ambient temperature is 5～30℃, relative humidity ≤ 85%RH, No sample in the test chamber GB/T5170.2-1996 Temperature test equipment Room temperature+15℃～100℃...

Door seal: food grade silicone seal, temperature resistance 300℃ Door opening setting of aging room: 1800×1800mm, (double door) Observation window: 400×300mm*2, tempered glass, installed on the chamber door. 5.2. Air conditioning channel 5.3. Standard configuration of laboratory body 5.4. Gate The temperature of the chamber door and the upwind joint is ≤ room temperature + 20 ℃ Fan, heater, orifice plate air supply duct, dry burning preventer Lighting lamp: explosion-proof lamp, two 60W/AC220V (chamber door) Double door 1800*1800 chamber door, independent observation window 400*300 double-layer...

Program capacity Editable: 20 groups of programs. Maximum 100 steps per program, 999 cycles can be set Predetermined range Temperature: Adjusted according to the temperature working range of the device (upper limit +5°C, lower limit -5°C) Communication function(optional) RS-485 interface, with local and remote communication functions (requires monitoring software, RS-485 converter, needs to occupy the COM port of the PC Anti-windup PID BTC balance temperature adjustment control method (temperature test equipment) Incidental function Over temperature alarm warm to time Program end standby function...

internal laminate Four layers of stainless steel laminates on the left and right sides (can be customized), with anti-static material on the surface 10. Optional accessories (functions) The following accessories (functions) are quoted separately and need to be specified in the contract or technical agreement 10.1. Lead Holes 10.2. Observation window 10.3. Centralized monitoring software 11. Shipping Optional φ50mm, φ100mm specifications, the location and quantity can be customized according to user requirements under the condition that the chamber structure allows and does not affect the performance...

environment Before the equipment leaves the factory, the company will issue a traceability inspection 13. Third-party report, which is valid for one year. Customers can also ask the National Metrology and Testing verification Center for verification. Equipment configuration list: 16. Main material table Name Cold rolled steel sheet paint/stainless steel sheet TH4810 Leakage protection type Type K LC1 Nichrome China France China France Taiwan, China A Structural part Unit and control chamber circulation motor B Control part controller switch sensor contactor Heating pipe thermal relay Under-reverse...

Temperature test curve