ITM-LAB MACHINE INC. ADD:No.32,Qiaoxin East Road,Qiaotou Town, DongGuan City,GuangDong Province,China. TEL: 86 769 83428055 Single arm drop test bench specification 一、Purpose This machine is suitable for testing product packaging damage caused by falling, and for evaluating the impact strength during transportation and handling. 二、System Components： 1.Host： a. This machine adopts single-arm double-column structure design: it overcomes the accidental separation caused by the sudden power failure or the interruption of the air supply due to the pneumatic design, the lifting is stable, and the lifting process is absolutely nothing. Fear of shaking left and right b. The support arm adopts electric reset design: there is no need for people to pull the support arm to reset, so as to avoid accidental injury and maximize the safety of the operator; c. The supporting arm adopts the electromagnet extraction structure, and the auxiliary design of the tension spring: to ensure that the supporting arm is separated from the test piece in an instant, the test piece can be impacted by free fall, and the actual impact speed The difference between the impact speed and the impact speed during free fall does not exceed ±1% of the free fall; d. Unique hydraulic buffer device design: instantaneously absorb the impact energy of the support arm, minimize the impact of the support arm on the table body during the impact of the support arm, so as to ensure the long-term use of the machine; e. Universal test piece support design: It can quickly test the positioning of the diamond, corner and surface of different sizes of packaging boxes to improve the test efficiency. The pallet is cross-engraved. High-speed design to ensure quick positioning of the center of the test piece; f. The impact bottom plate is steel design: the surface is flat, and the plane error is less than 2mm; 2.control box： a. Digital display height design: the drop height can be set, the current height value can be displayed in real time when it is lifted, and the lift will stop automatically when the set height is re

ITM-LAB MACHINE INC. ADD:No.32,Qiaoxin East Road,Qiaotou Town, DongGuan City,GuangDong Province,China. TEL: 86 769 83428055 truly realizes intelligent operation. The display height and actual height do not exceed ±2% of the predetermined height. The drop height refers to the distance between the lowest point of the test sample and the impact table when it is ready to be released b Electronically controlled drop/electrically controlled reset design: Overcome accidental detachment caused by sudden power failure or interruption of air supply due to pneumatic design. Electric reset also ensures the...