Name:Servo Control Full-automatic Insertion & Extraction Force Tester Model:RS-6600A Purpose: The machine is used in the insertion and extraction force tests of various kinds of connectors. Equipped with an automatic axopetal device and the special fixture for all kinds of connectors, it can ensure accurate insertion and extraction force results. The machine adopts the Windows program, which is easy to operate and can automatically store test data (such as load-stroke curve,load life die-away curve and test results) and all test conditions, The machine also adopts high-precision load cell measurement and servo motor drive, which ensures accurate insertion and extraction force results, making it an essential detecting instrument in the development and research and quality inspection of connector manufacturers and finished products manufacturers Typical Application: Connector whole line insertion and extraction test. Connector single port insertion and extraction test. Connector insertion and extraction duration test. Connector single pin and plastic retention test. Connector normal force test. Connector clip compression test. Connector dynamic impedance test. Various tensile and pressure test. Connector dynamic impedance test(optional). Specification: Capacity(optional) Load Accuracy Load Least Display Test Stroke Stroke least Display Effective width Test speed Speed Accuracy Panasonic servo motor Characteristics: Full-automatic test method The tester only needs to input and store the test conditions of the test piece of a certain batch and the machine will conduct the compression and tensile tests automatically; Widespread application With different fixtures, it can be used in various connector tests, such as the tensile and compression tests and the endurance and dynamic impedance tests of R&D and IQC finished connectors. After the test, it can automatically store the test curves and data;

High precision The load resolution can reach up to 0.01gf and the stroke resolution,0.001mm. Unit switchover The units of load such as N,gf,kgf and Lb can be switched freely, so can those of stroke such as mm and cm. Language switchover English, traditional Chinese and simplified Chinese are available, which shows good applicability. Large memory space The test data (curves and data) can be stored in the computer hard disc (the data for every test can be stored in it, without no limitation on the times). People-oriented design and user-friendly operation All test conditions are set on the computer...