ITM-LAB MACHINE INC. ADD：No.32,Qiaoxin East Road,Qiaotou Town, DongGuan City,GuangDong Province,China. TEL: 86 769 83428055 THE POWER CORD IS BENT & EXTRACT TESTER --- MODEL：RS-8100 Purpose: ※ This machine is equipped with 6 sets of clamps to test the flexural strength of accessories such as mobile phones/communication industry wires, plug leads and wires. The test method is to fix the sample on the clamp and add a certain load. The clamp swings from side to side during the test. After a certain number of times, check the disconnection rate; or when it is unable to power on, check the total number of swings. The machine can automatically count. When the sample is bent to disconnection and cannot be powered on, it can automatically stop the operation and give an alarm. Applicable standards：UL 817 Features ※ ※This machine is driven by an electric speed-adjusting motor, which runs smoothly and has low noise. ※ ※The key components of this machine are all made in Japan, and the performance is reliable, and a variety of dials are applicable to make your test accurate and fruitful. ※ This machine provides a fixture for clamping the accessory wire, which can realize the bending fatigue test of the fixed part of the wire, and the surface of the fixture is pasted with anti-slip glue to prevent the specimen from being pinched ※ It can test at least 6 wires at the same time. The test can provide a certain amount of pulling force along the wire direction, and the pulling force is adjustable (weight weight: 50g, 100g, 200g, 300g, 500g, 6 pieces each) ※ The number of wire bending can be set, and the setting range is between 0 and 999999. After reaching the set value, it can automatically stop and alarm

ITM-LAB MACHINE INC. ADD：No.32,Qiaoxin East Road,Qiaotou Town, DongGuan City,GuangDong Province,China. TEL: 86 769 83428055 Swing angle Swing speed Automatic counter power supply