Catalogs >
DONGGUAN ITM-LAB MACHINE INC. >
Cable Bending Tester RS-8105A-5

Cable Bending Tester RS-8105A-5
3Pages

Catalog excerpts

Technical specification of bending tester Cable Bending Tester MODEL:RS-8105A-5 （Typical applications）： It is suitable for bending test of earphone cable, USB cable, multi-core cable, communication cable, flat cable and signal cable. The test method is as follows: one end of the wire rod is short clamped, fixed on the rotating disc, and rotated left and right under a certain lifting load (load), so as to evaluate whether the wire rod has good conduction after n times of testing. （Machine features）： It is driven by Panasonic AC servo motor, with high precision, accurate positioning, low noise, and can be used for a long time ± 900, error: ± 10； a. Special power rectifier circuit is used to improve the long-term use ability and anti-interference of motor and executive components; b. Korean autonis high precision photoelectric switch is used for origin induction, with high pulse frequency and durable use; c. Using LCD touch screen controller as program input, PLC control, Chinese interface, easy to operate d. The test conditions are all set by the touch screen or LCD screen (angle setting, speed, test times, measured times, rotation dwell time,Stay for n minutes after n tests) f. Five cables can be tested at the same time g. Each group is equipped with signal (conduction test) test line and indicator light. Once the wire is broken during the test (no loop signal is formed), the indicator light of the current station will go out and stop counting; h The guide rods can be changed according to the wire diameter. The distance between the guide rods can ADD:No.32,Qiaoxin East Road,Qiaotou Town, DongGuan City,GuangDong Province,China.

Open the catalog to page 1

be adjusted from left to right. The fixture on the rotating disc can also be adjusted. （Technical index）： model Control system PLC Japan Omron touch screen + Mitsubishi PLC Panasonic servo motor Test speed Test angle range Minimum angle 0 ~ 1800 coaxial jack fixture can meet the axial 0 ~3600 tes Test frequency range Batch residence time Guide rod 1-10 minutes R1.5 ~ r12mm should be specified before ordering Diameter of rotating disc Host size Main engine weight Power Supply Machine appearance drawing (rs-8105a photo) ： The rotation of 90 degrees to the left and right can meet the...

Open the catalog to page 2