Catalogs >
DONGGUAN ITM-LAB MACHINE INC. >
Auto Steel Ball Impact Tester RS-8220V-XY

Auto Steel Ball Impact Tester RS-8220V-XY
5Pages

Catalog excerpts

Auto Steel Ball Impact Tester RS-8220V-XY - 1

AUTO STEEL BALL IMPACT TESTER MODEL：RS-8220V-XY Patented equipment, no plagiarism, patent number: ZL2017 2002 7769.1 Use of equipment: This machine can test the steel ball impact resistance of glass covers or rubber shells of mobile phones, tablet computers, e-books, electronic dictionaries and touch screen TP modules to evaluate the impact strength of products. Applicable standards: GB/T 14485 engineering plastics-Test method for impact resistance of rigid plastic plates and plastic parts-Falling ball method GB/T15763.2 tempered glass-impact resistance test GB/T13520 rigid PVC extruded board-falling ball impact method GB/T5226.1 general technical requirements for mechanical and electrical safety General technical requirements of GB/T2611 testing machine. Equipment requirements: 1) environmental conditions of equipment: temperature (5-35)℃, humidity ≤ 85% RH; 2) Height requirements: the impact test of steel balls at any height between 10 cm and 100 cm can be realized, the height can be automatically positioned, and the falling process is free fall; 3) Accuracy of ball falling position: the ball falling position is accurate, and the position deviation is 1mm; 4) Steel ball clamping fixture: it can clamp steel balls of different types from 4g to 500g; 5) Falling height deviation: ±1mm；; 6) Controller: controlled by computer, it is convenient to control the height parameters, the times can be recorded and cleared, and the test parameters can be memorized when power is off; 7) Requirements for dropping steel balls: 32.5g, 64g, 130g and 500g, all errors ≤±0.5g 8) Product clamping requirements: meet the versatility of different models of products, and be easy to install and use. Attach electrostatic rubber to the clip. When the clamping surface is larger than the product, there should be a gap in the clamp to facilitate the manual adjustment of the product state and ensure the safety of the manual. When the steel ball is lost in the test, the test will automatically stop. 9) Prevention of secondary impact: ensure that there is no secondary impact of steel balls during the test; 10) directionality: ensure that the falling direction of steel balls is p

Open the catalog to page 1

Auto Steel Ball Impact Tester RS-8220V-XY - 2

11) The equipment should have sufficient rigidity and wear resistance, small thermal deformation, low noise and good shock resistance; 12) Equipment design requirements: the safety of personnel operation should be considered, all parts should be passivated, the edges and corners of mechanical parts should be chamfered, the electrical parts should be protected by electric leakage, and the periphery of instruments should be protected by guardrails, etc. When the equipment is powered on, it can monitor various parameters of the equipment, and set reasonable protection and alarm measures for...

Open the catalog to page 2

Auto Steel Ball Impact Tester RS-8220V-XY - 3

mJ(1J=1Nm=1000mJ) according to the set height value mm and the input steel ball weight G. This machine adopts Japan Panasonic AC servo motor+reducer as lifting power source, PLC controls the height, and the positioning error is ±1mm. Japanese SMC vacuum sucker is used to absorb the steel ball. The steel ball is automatically sucked under the sucker. When it falls, the sucker instantly releases the steel ball. The steel ball will be subjected to free fall test and impact the surface of the specimen. The Japanese SUNS laser sensor is used to sense the falling of the steel ball. Once the...

Open the catalog to page 3

Auto Steel Ball Impact Tester RS-8220V-XY - 4

system will automatically calculate the impact energy according to the weight of steel balls. After the test, the impact strength will be displayed. Impact strength value (J joule) is calculated according to the following formula: J=9.8*0.001*H*W Where: J- impact value, n.m. H- falling height of sphere, mm W- falling ball mass, kg. Technical parameters: Weight of steel ball Drop height Drop number setting Infrared indication error X-Y platform W250*D200mm installation dimensions X-direction and Y0.1~100mm can be set direction step setting Test save quantity No less than 20 groups, which can...

Open the catalog to page 4

Auto Steel Ball Impact Tester RS-8220V-XY - 5

Patented equipment, no plagiarism, patent number: ZL2017 2002 7769.1 The whole machine is spliced with national standard aluminum+transparent acrylic board, which is safe and has good visibility. Electrical installation box Operating door Operating handle (left shift, right shift, forward shift, backward shift, impact point determination, impact control, etc.) Anti-secondary impact device X-Y mobile platform Patented equipment, no plagiarism, patent number: ZL2017 2002 7769.1 The above technical scheme involves the patented technology of ITM-LAB MACHINE INC.Forwarding, copying and...

Open the catalog to page 5