QUADRIX XL 1600 CNC CUTTING CENTER

Product catalog summary

Overview: The QUADRIX XL 1600 is a CNC cutting and shaping center designed for processing marble, granite, and sintered stone. It features five interpolated axes, a Z-axis stroke of 1000 mm, and a rotating blade head capable of swiveling from -5° to +545° and tilting from 0° to 90°.

Specifications: The machine supports disk diameters of 1600/2000 mm, allowing cuts up to 635 mm deep. It includes electro-spindles made in Italy, with adjustable revolutions and a steel carriage-mounted blade head. The X and Y axes use linear bearings and helicoidal-teeth racks, while the Z axis employs recirculating linear ball guides with an ACS safety system.

Processing Capabilities: The QUADRIX XL 1600 can perform various cuts, including oblique, circular, elliptical, inclined, rectilinear, concave, convex, and arched shapes. It is suitable for both two-dimensional and three-dimensional slab processing.

Software: The machine is equipped with several software solutions:

Parametrix: Optimizes cutting management using predefined shapes or imported DXF files.
SCAN CNC: Uses a laser pointer for detecting two-dimensional profiles and creating DXF files.
ISOSAG: Creates files for rectilinear or concave shapes and convex arcs, supporting roughing and finishing processes.
PHOTOSLAB: Utilizes a camera to detect slabs, optimizing dimensions and positioning while avoiding defects.

Technical Data:

Max interpolated axes: 5
Carriage stroke (X axis): 3700 mm
Bridge stroke (Y axis): 3000 mm
Vertical stroke (Z axis): 1300 mm
Disk head rotation: -5° to 545°
Disk head tilting: 0° to 90°
Max disk diameter: 1600/2000 mm
Max cutting depth: 635 mm (800 mm optional)
Electrospindle power: 35 kW (46 kW optional)
Disk rotation speed: 0 to 2400 RPM
Water consumption: 50 l/min
Air consumption: 5 l/min
Standard voltage: 400 V / 50 Hz
Machine weight: 12000 kg

Note: Technical data and images are indicative and subject to change without notice.

Catalog excerpts

DONATONI HIGH INNOVATION STONE MACHINES Highest quality For your skill

Open the catalog to page 1

THE SOLUTION FOR GREAT CHALLENGES QUADRIX XL 1600 is a 5 interpolated axes CNC cutting and shaping centre with Z-axis stroke of 1000 mm, rotating blade head swiveling from -5° to +545° degrees and tilting from 0 to 90 degrees, to perform orthogonal cuts up to 635 mm, for the execution of marble, granite and sintered stone works of middle and large dimensions. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, exacavations of twodimensional and three-dimensional slabs. Electro-spindles with high quality produced in Italy, with...

Open the catalog to page 2

SOFTWARE PARAMETRIX Parametrix is the simple and userfriendly software developed by Donatoni Macchine and conceived to optimise the management of cutting different shaped pieces from slabs. It allows you to manage different kind of cutting processes using predefined shapes in the programme or imported from DXF files and automatically to set the position of the pieces and the sequence of cuts, optimizing the times and reducing material waste. ISOSAG The software allows to create files for the performance of rectilinear or concave shapes and convex arc both with vertical and horizontal blade. The...

Open the catalog to page 3

Max number of interpolated axes Electrospindle power CONFINDUSTRIA MARMOMACCHINE ASSOMA RMOMACC HIN E Donatoni Macchine Srl Via Napoleone 14, 37015 Domegliara Sant'Ambrogio di Valpolicella / Italy Tel. +39 045 6862548 Fax +39 045 688 43 47 [email protected] www.donatonimacchine.eu

Open the catalog to page 4

All Donatoni catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list