*mydirectindustry

W613

Product catalog summary

Specifications:
The W613 In-Line Cartridge Filters are designed for high-pressure applications with a maximum flow of 35 gpm (130 lpm) and working pressures up to 6500 psi (44,800 kPa, 448 bar). They have a rated static burst pressure of 20,000 psi (138,000 kPa, 1380 bar) and a fatigue pressure rating of 3250 psi (22,400 kPa, 224 bar). The filters are available with different porting size options, including SAE-12, -16 O-ring, and 1" SAE 4-Bolt Flange Code 61 or 62.

Filter Features:
The filters utilize Donaldson DT high-performance 4-layer media available in five different grades. They include features like differential pressure indicators, surge control, and thermal lockout to prevent premature actuation during cold start-ups. The head material is cast iron, and the housing is made of steel.

Performance Data:
The filters have a Beta Rating of ß<4(c)=1000, indicating high filtration efficiency. The standard bypass ratings are 90 psi (621 kPa, 6.2 bar) and 50 psi (345 kPa, 3.5 bar), with an option for no bypass. Operating temperatures range from -20° to 250°F (-29° to 121°C).

Filter Options:
Replacement filter lengths vary from 4.41" (111.9mm) to 8.28" (210.3mm). The filters are available in different media ratings, including 2 µm, 5 µm, 8 µm, 14 µm, and 25 µm, with specific part numbers for each.

Ordering Guide:
The ordering guide provides options for filter collapse ratings, port sizes, bypass settings, assembly and filter lengths, indicator styles, and seal materials. Customers can configure the product with specifications and features of their choice.

Additional Notes:
All Donaldson DT filters use glass fiber media with an epoxy-based resin system for chemical compatibility. High collapse designs use stainless steel mesh and are potted into machined aluminum endcaps for greater integrity. Viton® seals are standard on all filters.

Catalog excerpts

FILTRATION SOLUTIONS W613 In-Line Cartridge Filters Rated Static Burst to: Fatigue Pressure Rating: The W613 with the T-Type port arrangement is an alternative to the W610 L-Type porting. These are offered with the same housing, filter and indicators used in our W610 filter assemblies. Donaldson DT high-performance 4-layer media is offered in five different media grades. The differential pressure indicator line is designed to work with the wide assortment of bypass valves. Thermal lockout and surge control are two key features incorporated • Head material: cast iron • Housing material: steel Beta Rating Porting Size Options Assembly Weight Replacement Filter Lengths Standard Bypass Ratings Operating Temperatures Filter Collapse Ratings

Open the catalog to page 1

W613 HIGH PRESSURE FILTERS Max Flow: 35 gpm (130 lpm) W613 Specification Illustrations All dimensions are shown in millimeters [inches]. Indicator Switch Schematic Wiring Diagram Assembly - Side View P Indicator Aluminum Electrical Housings Vi s 38.1 (1.50) Max. ualElectrical- 49.53 (1.95) Max. P Indicator Vi s 38.1 (1.50) Max. ualElectrical- 49.53 (1.95) Max. 50.8 (2.00) Outlet Port 50.8 (2.00) Outlet Port Inlet Port Inlet Port Refer to Model Code (Assembly Length) Refer toRefer to Choices Filter Model Code (Assembly Length) (Assembly Length) Note: The female plug (connector) is to be furnished...

Open the catalog to page 2

FILTRATION SOLUTIONS High-Performance DT Filter Choices Filter Notes •All Donaldson DT filters utilize glass fiber media with an epoxy-based resin system for the ultimate In chemical compatibility. •All Donaldson DT filters are potted with epoxy-based • Standard collapse DT designs are double wire- backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. • High collapse designs are double wire-backed using stainless steel mesh. • High collapse designs are also potted Into machined aluminum endcaps for greater filter Integrity In critical applications. • Vlton® seals are...

Open the catalog to page 3

FILTRATION SOLUTIONS Housing Ordering Guide Filters ordered separately. See previous page for filter options. LEAD TIME NOTE: This product is configured with the specifications and features of your choice. Please contact your Donaldson sales representative for lead time details. Filter Assembly CODE DESCRIPTION Media Ratings Assembly & Filter Length CODE (LGTH) FILTER LENGTH METRIC PORTING AVAILABLE Porting code A becomes 3/4" Porting code B becomes 1" Porting code F becomes 1" SAE 4 bolt flange with M10 mounting threads Porting code M becomes 1" SAE 4 bolt flange with M12 mounting threads Brad...

Open the catalog to page 4

W613

W613

Catalog excerpts

All DONALDSON catalogs and technical brochures

Archived catalogs