*mydirectindustry

Catalogs
DONALDSON
W610 In-Line Cartridge Filters

W610 In-Line Cartridge Filters

Product catalog summary

Overview: The document provides detailed specifications and features of the Donaldson W610 high-pressure hydraulic filters, designed for use in hydraulic systems with a maximum flow of 50 gpm (189 lpm) and working pressures up to 6,000 psi (41,368 kPa).

Specifications:

Working Pressure: Up to 6,000 psi (41,368 kPa).
Static Burst Pressure: Rated to 20,000 psi (138,000 kPa).
Fatigue Pressure Rating: 3,500 psi (24,131 kPa).
Flow Range: Up to 50 gpm (180 lpm).
Beta Rating: Performance to ß<4(c)=1000.
Porting Size Options: SAE-12, -16 O-ring, 1" SAE 4-Bolt Flange Code 61 or 62, Manifold Mounting.
Assembly Weight: 6.75" - 9.72 lbs (4.4 kg), 10.40" - 12.33 lbs (5.6 kg).
Replacement Filter Lengths: 4.41" (111.9mm), 4.46" (113.2mm), 8.16" (207.2mm), 8.28" (210.3mm).
Bypass Ratings: 90 psi (621 kPa), 50 psi (345 kPa), No Bypass.
Operating Temperatures: -20° to 250°F (-29° to 121°C).
Filter Collapse Ratings: 150 psi (1034 kPa) standard, 3000 psi (20,700 kPa) high collapse.

Features:

Materials: Head material is cast iron, housing material is steel.
Indicators: Differential indicators actuate at approximately 80% of bypass valve cracking pressure.
Surge Control: Dampens pressure surges to avoid premature indicator actuation.
Thermal Lockout: Prevents premature bypass signaling during cold start-ups.

Filter Media Options:

Available in various micron ratings (2µm, 5µm, 8µm, 14µm, 25µm) with different lengths.
High-performance DT filters use glass fiber media with epoxy-based resin for chemical compatibility.
Standard and high collapse designs available, with Viton® seals as standard.

Ordering Guide:

Includes options for filter assembly, collapse options, port size, bypass settings, indicator style, and seal material.
Metric porting available with specific codes for different configurations.

Performance Data: Graphs illustrate pressure drop across various flow rates for different micron ratings, highlighting the efficiency and capacity of the filters.

Catalog excerpts

FILTRATION SOLUTIONS W610 In-Line Cartridge Filters Rated Static Burst to: Fatigue Pressure Rating: ùï«ttClivl OKI'S The W610 filter assembly can be manifold mounted to the hydraulic system. Other port options include SAE straight thread and 4-bolt flange. Donaldson DT high-performance 4-layer media is offered in five different media grades. The differential pressure indicator line is designed to work with the wide assortment of bypass valves. Thermal lockout and surge control are two key features incorporated in many of the valves. • Head material: cast iron • Housing material: steel Beta Rating Porting Size Options • Manifold Mounting Assembly Weight Replacement Filter Lengths Standard Bypass Ratings Operating Temperatures Filter Collapse Ratings Hydraulic Filtration

Open the catalog to page 1

FILTRATION SOLUTIONS All dimensions are shown in millimeters [inches]. Indicator Switch Schematic Wiring Diagram Aluminum Electrical Housings ssembly - Side View SWITCH (BRAD HARRISON, 41512) Refer to Filter Choices (Assembly Length) Element And Bowl Remova RECEPTACLE (HIRSCHMANN) níet Port Bleed Plug Drain Plug Note: The female plug (connector) is to Plastic Electrical Housings Outlet Port Manifold Mounting Inlet and Outlet Port RECEPTACLE (HIRSCHMANN) Note: The female plug (connector) is to Differential Indicators: Indicators are designed to actuate at approximately 80% of bypass valve cracking...

Open the catalog to page 2

FILTRATION SOLUTIONS High-Performance DT Filter Choices Filter Notes •All Donaldson DT filters utilize glass fiber media with an epoxy-based resin system for the ultimate In chemical compatibility. •All Donaldson DT filters are potted with epoxy-based • Standard collapse DT designs are double wire- backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity. • High collapse designs are double wire-backed using stainless steel mesh. • High collapse designs are also potted Into machined aluminum endcaps for greater filter Integrity In critical applications. • Vlton® seals are...

Open the catalog to page 3

FILTRATION SOLUTIONS Housing Ordering Guide LEAD TIME NOTE: Filters ordered separately. See previous page for filter options. This product is configured with the specifications and features of your choice. Please contact your Donaldson sales representative for lead time details. Filter Assembly CODE DESCRIPTION Media Ratings Note: Use option 1 code only with 3000 psid collapse filter. METRIC PORTING AVAILABLE Porting code A becomes G3/4" Porting code B becomes G1" Porting code F becomes 1" SAE 4 bolt flange with M10 mounting threads Porting code M becomes 1" SAE 4 bolt flange with M12 mounting...

Open the catalog to page 4

W610 In-Line Cartridge Filters

W610 In-Line Cartridge Filters

Catalog excerpts

All DONALDSON catalogs and technical brochures

Archived catalogs