Technical Data Sheet Page 1 of 2 Aftercooler for compressed air and gases UFK-L The aftercooler UFK-L is designed to cool compressed air, but can be used for other gases as well. Product description: Technical Data The UFK-L as an additional piece of equipment after the compressor supports an efficient and economical purification of compressed air. The warm incoming air is lead over the cooling pipes where the cooling air is adsorbing the heat. The generated condensate will be drained by a cyclone separator. carbon steel Surface finish Polyester resin coating resp. cathodic dip-coating Electr. connection: In this product series, 12 different housings are available ranging from a volume flow of 65 to 5000 m3/h. Maximum operating pressure: 0065 - 0300 0450-5000 Features: Maximum operating temperature: 120°C Maximum ambient temperature: 45°C Annotation: The flow capacity is related to a compressed air volume flow (at 1bar, 20°C) at 7 bar pressure, an air cooler inlet temperature of 120°C and an air cooler outlet temperature which is 10°C higher than the ambient temperature. Technical alterations reserved (6/2018) Donaldson Filtration Deutschland GmbH · Industrial Filtration Solutions · Büssingstraße 1 · D-42781 Haan · Telefon +49/21 29/569-0 · Telefax +49/21 29/569-100 The air cooled aftercooler consists of the cooling device in a steel plate cabinet, the fan with integrated electric motor and a cyclo

Technical Data Sheet Operating parameters: For operating conditions not according to standard see tables with correction factors Correction factors: Type 1350 - 5000 Ambient temperature rT = Air inlet temperature - Air outlet temperature Power cons. Power supply Cyclone separator