Process Filtration From pure to steril P-EGS 0005-0030 MAIN FEATURES & BENEFITS • Steamfilter housing Design in compliance with -FDA CFR Code of Federal Regulations Title 21 -Framework regulation 1935/2004/EC -Pressure equipment directive 2014/68/EU High quality stainless steel design Extremly low differential pressure Various connection types PRODUCT DESCRIPTION P-EGS housings were developed for the purification of steam in different ranges of applications. Due to the optimized construction they offer a very low differential pressure at high flow rates. Combined with the different Donaldson filter elements P-GSL N they provide an optimized solution for nearly all applications. The P-EGS series is available in 4 different housing sizes with steam mass flows up to 600 kg/h (at 2 bar abs.). The Donaldson plug connection guarantees that the element re- mains safely fixed always. The housings are available with BSP threads, flange or with welded end connection according to DIN 11850. Donaldson Filtration Deutschland GmbH Büssingstrasse 1 42781 Haan • Deutschland Tel. +49 2129 569 0 Fax +49 2129 569 100 [email protected] www.donaldson.com Technical alte

PROCESS FILTRATION All P-EGS steam housings are designed in accordance with • FDA CFR Code of Federal Regulations Title 21 Pressure equipment directive 2014/68/EU All P-EGS steam housings are manufactured according to ISO 9001/2008 hergestellt. DIMENSIONS Position Upper housing bowl Lower housing bowl Housing gasket Filter element Max. operating temperature with standard gasket EPDM Test pressure Inside: etched, passivated, Ra <1.6μm Outside: etched, passivated and polished, Ra <1.6μm For steam (fluid group 2) * pressure limitation for type P-EGS 0030: 12 bar ** -25/+200°C special O-rings required...

PROCESS FILTRATION SIZING RECOMMENDATION Optimal steam flow in combination with P-GSL N 1μm elements Housing Parameters: Pipe velocity <30 m/s or initial differential pressure <0.05 bar (@ 2 bar abs.) Maximum steam flow in combination with P-GSL N 1μm elements Housing Parameters: Pipe velocity <40 m/s or initial differential pressure <0.1 bar (@ 2 bar abs.) For more information please contact your Donaldson Sales Engineer or visit our website at www.donaldson.com!