Oil/Water Separators

As one of the world's leading manufacturers of compressed air purification equipment in the world, Donaldson has built a comprehensive engineering, manufacturing, and customer support network to meet the most demanding applications. With over 30 years of expertise in compressed air filtration and separation technologies, Donaldson manufactures a complete line of oil/water separators to effectively and efficiently separate oil from compressed air condensate. The need for condensate management occurs when liquid condensate is generating at several points throughout a compressed air system, including...

Easy to Install, Operate and Maintain Features & Benefits • Removable Pre-Sedimentation Tank Before liquid condensate enters separation will take place, it first passes tank. This allows solids to separate out before they can foul the larger tank.The pre-sedimentation tank is small enough to be removed easily for cleaning. • Tapered Carbon Bag Chambers utilize integrated carbon adsorbers to further purify settling tank. The chambers that hold these carbon bags are tapered for easier removal of the bags from the unit. Pre-Adsorber Protects Carbon Adsorbers To lengthen the life of the integral...

How The DS Oil/Water Separator Works Q Liquid condensate and compressed air enter the pressure relief chamber at the top of the unit. f% A foam coalescing pad captures condensate droplets that are entrained in the expanding and exhausted air stream, which exits the top ^ Liquid condensate enters a removable pre-sedimentation chamber where solid particles are separated and captured. Q Condensate exits the pre-sedimentation chamber by passing through a coalescing foam block which begins the process of oil-water separation. Q Condensate flows into and fills the primary settling chamber where gravity...

Dimensions & Specifications Model Selection Table * Moderate climate (68°F, 70° RH). For tropical climate (100°F, 90° RH), Only for compressed air condensate. Donaldson guarantees a residual oil content of less than 20 ppm in accordance to EN ISO 9377-2 with The warranty only applies to: - Proper use with an oil/water mixture. - Use of original replacement and spare parts. - Proper installation and commissioning according Optional Accessories Thermostat Controlled Heater If the DS Oil/Water Separator is installed in an area where the ambient temperature might go below 34°F, use the optional thermostat-...

AirCel ™ ™ rust Donaldson Compressed Air & Gas to deliver a complete range of compressed air purification solutions that improve air quality throughout your plant – from the compressor room to all points of use. With over 30 years of expertise in compressed air filtration and separation, Donaldson manufactures a complete line of drying and filtration equipment using innovative designs that focus on energy efficient operation and reliable performance. T Donaldson has built a comprehensive engineering, manufacturing, and customer support network to meet the most demanding applications. Leading...