Catalogs >
DONALDSON >
DISK DRIVE SEALS

DISK DRIVE SEALS
2Pages

Catalog excerpts

¿si Donaldson. I DISK DRIVE SEALS FILTRATION SOLUTIONS Disk Drive Vapor barrier material such as aluminum foil or matalized polyester with a pressure sensitive adhesive for sealing access ports and seams in the drive. The seal system is designed to minimize the diffusion of harmful gases and particles into the disk drive. Donaldson seals secure the drive opening so that air is channeled through breather filters, also provided by Donaldson. Both are essential components of an effective disk drive contamination control strategy. The seal is most often attached to the outside of the drive on the cover or base, though it can be installed on the inside if needed. It is designed to close off any openings in the drive where contamination can enter, as well as to help maintain the overall internal pressure of the drive by preventing too much air from escaping. These openings mainly include screw holes, but can also include read/write access points as well as holes for Standard Breather Filters installed on the inside of the drive that were used in the drive assembly process. enable automatic adhesive designed free removal Continuous vapor minimize diffusion particles into drive exposed adhesive

Open the catalog to page 1

DISK DRIVE SEALS PRODUCT GUIDELINES AND SPECIFICATIONS Contamination Control Certified cleanroom manufacturing and inspection Certified to pass the most stringent cleanliness specifications Adhesive-free zones where required Supplied on non-particulated injection molded cores Available on silicone-free liners Contact Donaldson today for more information! Disk Drive Disk Drive Seals (07/10) © 2010 Donaldson Company. All Rights Reserved. Information in this document is subject to change without notice. Seoul, Korea Hong Kong

Open the catalog to page 2

DISK DRIVE SEALS 2Pages

Catalog excerpts

All DONALDSON catalogs and technical brochures

DISK DRIVE SEALS
2Pages