Clean Fuel & Lubricant Solutions Deliver Clean Fluids Clean Fuel and Lubricant Solutions: Clean Fluids – Keep Running. Exceed your customer’s expectations by delivering their fuels and oils at OEMs recommended ISO Cleanliness Codes or better. OEMs and end users are demanding fuels and oils to be cleaned to certain cleanliness levels prior to dispensing into their equipment. It is a industry challenge to achieve those levels. Donaldson has developed the products and the process to maintain these stringent ISO levels. Contact Donaldson to find out how you can deliver “Clean Fluids” . Donaldson Company, Inc. Minneapolis, MN Donaldson’s filters are designed to achieve ISO Cleanliness Codes of 18/16/13, 16/14/11 and 14/13/11 in single pass filtration. Why waste time and money pushing your fluids through a filter multiple times to achieve the same results as one pass? North America 800-374-1374 Spin-on filters are piped together to accept high flow rates and extend the unit’s service life. Easy to change, single pass filtration manifolds are installed to clean the fluids with minimal effect to your operation’s current processes. Brochure No. F111503 ENG (10/12) © 2012 Donaldson Company, Inc. All rights reserved. Donaldson Company, Inc. reserves the right to change or discontinue any model or specification at any time and without notice. Printed in the U.S.A.