Safety and Light
10Pages

Flashing signalling devices with interlock limit switch and light

Flashing signalling devices with interlock limit switch and light Technical features Conforming to standards: IEC 947-5-1 - CEI 7.45 - EN 60947.5.1 Protective treatment: Standard version: “TC” Working temperature: -25°C +65°C Rated insulation voltage: Ui 690 A.C. Level of pollution: Class 3 Compliance with RoHS directives: yes The installation of the Ai1 - flashing signalling device - can prevent accidents by alerting with flashing lights the operator that the electrical system is switched on. Ai1 flashing signalling devices are installed in a position where they are visible when opening...

Flashing signalling devices with interlock limit switch Standard model Standard model + sound Integrated limit and interlock switch (also available with magnetic switch) Fast mounting thanks to the buttonholes Buzzer sound 80db (optional) High intensity thanks to the three flashing powerful LEDs. Contact 1NO+1NC: usually used to switch on lighting and to switch off fans or conditioners

Flashing signalling devices with interlock limit switch and light Full model Full model + sound Integrated limit and interlock switch (also available with magnetic switch) Fast mounting thanks to the buttonholes Buzzer sound 80db (optional) Number of LEDs: 44 Light consumption: 80mA on 36V max High intensity thanks three flashing LEDs ultrapower Contact 1NO+1NC: usually used to switch on lighting and to switch off fans or conditioners Light color: white

Ail - All in one LED electronic lamp universal power supply AI1 LED Weight 181g AilSIDOMO Lamp model (also available with magnetic switch) Fast mounting thanks to the buttonholes Light color: white

Light only (without light only) (with or without light) |UUU One-phase 220*400V, 50/60 Hz One-phase 100*300 V, 50/60 Hz (without light only) (with or without light)

Round label holder Weight 1g Square label holder Weight 1g Fastener for type B elements Weight 2g Reducer ring from 022mm to 016mm Weight 2g Protective slides Weight 4g Tightening wrench Weight 9g Contact ring filler for Pushbutton Switches' central contact Weight 1g

Accessories and spare parts Ø22mm Round label holder Weight 2g Square label holder Weight 2g Fastener for type B elements Weight 3g Reducer ring from ø30mm to ø22mm Weight 2g Protective slides Weight 4g Tightening wrench Weight 9g Lamp extractor Weight 2g Attention! Only compatible with: BA9s, BA7s, T5.5, T5.5k, MG

The following table classifies the various types of envelope according to the EN 60 539 (IP) and IEC-529. The different degrees of protection provided by enclosures (IP code). Protection followed by the 3 characteristic numbers indicating: 1st number (protections againts solid bodies) 2nd number (protections againts liquid bodies) 3rd number (protections againts mechanical bodies) 2nd (EN 60 539 - IEC 529) Characteristic Number IP TEST 3rd (EN 60 539 - IEC 529) Characteristic Number IP TEST Protection against solid bodies greater than 050 mm. Protection against the vertical falling of...

SBDOMO SIGNALLING AND CONTROL DOMO S.r.l. Via Leone Tolstoi, 34 20098 San Giuliano Milanese (MI) ITALY +39 02 98240540 ■3 +39 02 9848601 131 info@domo.it www.domo.it Pushbutton Switches Control and Annunciator Panels Mosaic Mimic Panels