Website:
DOLD
Catalog excerpts
Selection and positioning of antennas SAFEMASTER W Mounting and positioning of antennas Our experience. Your safety.
Open the catalog to page 1
Comparison of frequencies 433 / 434 and 869 MHz? Antenna selection / gain Antenna selection / gain When choosing an antenna the characteristic and polarisation of antenna and receiver should be similar. It is also important to direct a high gain antenna very precisely to achieve the best transmission characteristic. Line of sight view between the antennas is recommended but not essential. Application areas Depending on the area, distance and possible reflections, the antenna size of 1/4 lambda or 1/2 lambda (higher gain) should be selected. ► 1/4 lambda antennas give a broader spread of...
Open the catalog to page 2
When obstacles such as machinery and plant are in the radio direction path, this can reduce the transmission signal. Mounting height The number of obstacles and the way they are positioned can also have an influence. The length of the cable between radio module and antenna should be as short as possible to keep the losses as low as possible on the transmission signal. For outside applications the antenna cable should always approach and be connected from the bottom to the antenna. If this is not possible a drip loop could be implemented. For protection against weather influences at the...
Open the catalog to page 3
SAFEMASTER W Distances For a reliable reception the correct distance and stable mounting and adjustment is important. It is best is to install the antenna as far as practical from obstacles (buildings, trees, poles, metal objects and other antennas). To avoid lightning strikes on outdoor applications, the antenna should not be mounted close to a lightning rod, and should have an over Voltage transient protection device fitted. For protection against weather influences at the cable antenna junction, weather tape is recommended for protection against ice and snow. Distances When using several...
Open the catalog to page 4
Innovative safety concepts As a solution provider for safe automation and electrical safety, DOLD offers a comprehensive product portfolio from a single source. Our SAFEMASTER solutions have been successfully used for many decades around the world. From single function safety switching devices for simple safety applications through to multifunction, modular safety systems, DOLD develops tailor-made solutions for your industry and applications. We would be happy to provide you with information about further safety solutions. SAFEMASTER STS The SAFEMASTER STS modular safety switch and key...
Open the catalog to page 5All DOLD catalogs and technical brochures
-
Safety technique626 Pages
-
SAFEMASTER13 Pages
-
SAFEMASTER5 Pages
-
SAFEMASTER PRO9 Pages
-
VARIMETER PRO5 Pages
-
VARIMETER7 Pages
-
SAFEMASTER W group mode9 Pages
-
SAFEMASTER W9 Pages
-
PCB Relays Safety Relays148 Pages
-
DOLD3 Pages
-
Insulation monitor RN 58972 Pages
-
Safety technique626 Pages
-
Installation technique114 Pages
-
Time control technique194 Pages
-
Control technique162 Pages
-
Power electronics210 Pages
-
Monitoring technique514 Pages
-
News E-Mobility3 Pages
-
News 2018.013 Pages
-
News 2017.015 Pages
-
News 2017.023 Pages
-
News 20163 Pages
-
Highlights7 Pages
-
Speed monitor UH 69322 Pages
-
Flyer Option module4 Pages
-
Flyer Safety timer UG 69602 Pages
-
Flyer Safety module UG 69702 Pages
-
Flyer enclosure KS 44603 Pages
-
Brochure SAFEMASTER STS20 Pages
-
Flyer SAFEMASTER STS2 Pages
-
Enclosure overview20 Pages
-
Flyer In Rail Bus4 Pages
-
company presentation7 Pages
-
Flyer SAFEMASTER PRO2 Pages
-
Catalog relay modules909 Pages
-
Catalog PCB relays safety relays135 Pages
