Wireless enabling switch - Have a good grip on safety In automised processes safety systems block the access to dangerous areas. Often people have to work inside a dangerous area while the machine is in a special operati- on mode e.g. during test, programming and maintenance. Especially for these situations the TUEV approved 3-step radiocontrolled enabling switch SAFEMASTER W provides the necessary safety functions. It allows a safe operation and safe disconnection in a dangerous situation. It is designed for universal usage and allows maximum mobility and flexibility. In the case of danger the opera- tor presses the button fully or releases it from middle position.The machine goes into safe state. In addition the unit has a display and 4 programmable push buttons to actuate up to 20 control functions.This allows to adopt the device to the actual application.The ergonomic designed enabling switch with large display provides a comfortable one hand operation. Your advantages ►- Maximum mobility and flexibility at highest safety ►• For safety applications up to PL e/Cat 4 or SIL CL 3,TUEV approved Individual configurable push buttons for up to 20 control functions ►• Ergonomic transmitter for non-tiring operation ►• Comfortable one-hand operation ►- Clear operating panel with easy to read display Fast frequency adoption to environment on the enabling switch Maximum freedom of movement due to wireless design ►• High operating safety by dynamic and redundant data transmission protocol

Enabling switch RE 6910 System components of SAFEMASTER W - wireless enabling switch RE 6910 (transmitter) - radio controlled safety module BI 6910 (receiver) - charger station for enabling switch (RE 6910/010) (as option) Radio controlled safety module BI 6910 - to receive e-stop and control signals via radio transmission - to connect e-stop buttons, gate contacts or light curtains - safety output contacts: 3 NO or 2NO and 1 NC and 6 transistor outputs for control functions - manual and automatic start - 3 transistor outputs and LEDS for status indication Enabling switch RE 6910 and charger...