Torque tester EZ smart series
2Pages

TORQUE MEASUREMENT To connect your external transducer - either Static or Rotary TORQUE TESTER EZ SMART SERIES Robustness - Steel frame and front panel - Equipped with anti-slip pads User friendliness Equipped with a built-in transducer the EZ smart series is ideal to control and set the torque delivered by tightening tools (Air and electric screwdrivers, Torque Wrenches, Impulse tools...). Thanks to its embedded software, readings are automaticaly stored and Cm / Cmk statistics calculated against preset tolerances. External transducers may be used as well thanks to its transducers input. - Easy to use scroll Menu - USB output for printing out results or exporting to a PC via HyperTerminal Flexibility of use - External transducers may be plugged Advanced functions - 500 readings memory - Cm/Cmk statistics - Measuring modes : Peak, Impulse Peak, Track, First Peak Peak / Impulse Peak First Peak Data transfer to PC via HyperTerminal

Sensor male ouput All models are delivered with their own calibration certificate, as well as a USB cable for charging, printing out or exporting to a PC via HyperTerminal. CALIBRATION CERTIFICATE Designation Non-COFRAC calibration Tester 1 to 100Nm Comparison with standard 3 x 6 points ACCESSORIES We also offer a whole range of joint kits, for an easy simulation of all joint conditions. Model Joint type Joint type Hex. int. screw M2 (accross flat 2,5 mm) Hex. int. screw M3 (accross flat 4 mm) Hex. int. screw M4 (accross flat 5 mm) © DOGA | DOC.60340.09/20 We constantly strive to improve...