Doepke The experts in residual current protection technology DATA SHEET Busbar, four-pole, 4x16, D02 for D0 switch-disconnectors Tytan and Coron Article No. 09980093 Symbolic image Function Wiring materials are components for the wiring of residual current circuit-breakers, residual current operated and miniature circuitbreakers and D0 switch-disconnectors in industrial, commercial and privately use electrical distribution units. They considerably reduce the installation work. Covers and other additional products are available as accessories. The busbars in this series can be cut to length and are designed for the supply-side connection of D0 switch-disconnectors of type Tytan II and Coron 2. The bars with ange design are available in a wide range of variants in one to four-pole design with dierent cable cross-sections and provide time-saving and userfriendly processing options. End caps from the “EK” series allow the covering of open ends of bars that have been cut to length. Features can be used for connecting D0 switch disconnectors from series Tytan and Coron 2, wide range of variants , compact design, saves a lot of time during wiring, entire length approx. 1000 mm, can be cut to length, insulation of the open ends using optional "EK" end caps is recommended Mounting The rails are inserted in the upper or lower terminals of the devices to be connected. Applications Busbars from this series are used in connection with Tytan and Coron 2 in power supplies to residential and purpose-built buildings as well as to industrial facilities. Accessories EK-4/10/16 Technical Data Series suitable for model range Number of Phases Specification connection Cross-section rail Modular dimension, rail Rated voltage (AC) Rated current (AC) Rated short-circuit current Rated impulse withstand voltage Description Housing material Insulated Length Busbar, four-pole, 4x16, D02 DO2 Tytan 4 Pin 16 mm² 27 mm 690 V 80 A 15 kA 4.5 kV General data Polycarbonate (PC) true 0.97 m

77ie experts in residual current protection technology