F5850 Testing Interface for the IntelliRupter® PulseCloser Use the F5850 to effectively test and verify correct operation of the S&C IntelliRupter® PulseCloser. The F5850 is a portable test interface that is used in combination with Doble's F-Series Power System Simulators to test setting and logic schemes of the IntelliRupter Control Module. Using the IntelliRupter docking station along with the F5850 and F6150/F6150SV users are able to fully check the operation of the devices in the field or in a test lab environment. All required analog signals are connected through the low level source cable. All inputs and outputs are connected to the Auxiliary I/O connection on the Power System Simulator to ensure proper connection every time. Features: • Single phase or three phase testing • All software protection packages support testing • Predefined test plans available in Protection Suite 2.2 • Rugged design for field testing • Only 3 cables required to connect for testing

Specifications Weight: Input Current: Temperature Range: Ordering Information Part Number F5850, IntelliRupter® PulseCloser Test Interface Accessories Cable, External, Control Module I/O Cable, Interface, Low Level Sources, 5ft External Cables and Accessories Kit (Includes all listed accessories) Doble Engineering Company Worldwide Headquarters 85 Walnut Street Watertown, MA 02472 USA tel +1 617 926 4900 fax +1 617 926 0528 www.doble.com Specifications are subject to change without notice. Doble is ISO Certified Doble is an ESCO Technologies Company MKT-SL-F5850-1/2013