M5400

M5400

M5400

Product catalog summary
Overview: The M5400 Sweep Frequency Response Analyzer (SFRA) is a tool designed to detect hidden transformer faults by analyzing mechanical failures or movements in transformer windings. It helps ensure transformer performance, reduce maintenance costs, and extend service life.
Key Features:
  • Technique: Utilizes Sweep Frequency Response Analysis, a standard method for frequency domain measurements, to diagnose core and winding issues.
  • Non-Intrusive Testing: Allows for testing without dismantling equipment, useful for regular maintenance or when issues are suspected.
  • Fault Detection: Identifies core movement, winding deformation, faulty core grounds, partial winding collapse, hoop buckling, and more.
Technical Specifications:
  • Excitation Source: Single channel, 10 Hz – 25 MHz frequency range, 20 V peak-to-peak output voltage.
  • Measurement Channels: Two channels with simultaneous sampling, 10 Hz – 25 MHz frequency range, 100 MS/s max sampling rate.
  • Data Collection: Sweep Frequency method, Ethernet USB/Serial communication, 1000 to 1800 points, >90 dB dynamic range.
  • Data Display: Linear/Log scaling, frequency vs. magnitude/phase plotting, difference and sub-band cross-correlation analysis.
Technical Merits:
  • Range: Effective diagnostic frequency range from 20 Hz to 2 MHz, covering core and magnetic properties, winding movement, and interconnections.
  • Resolution: Logarithmic frequency intervals of 1.2%, maintaining constant excitation level for high accuracy and dynamic range.
  • Repeatability: High-quality, repeatable measurements suitable for field diagnostics.
  • Practicality: Supported by Doble's experienced engineers, offering reliable test leads and field techniques.
Physical Specifications:
  • Dimensions: 18.2 x 13.4 x 6.7 inches (46.2 x 34.0 x 17.0 cm).
  • Weight: 13.1 lbs (6.0 kg).
  • Power Supply: 100-240V AC.
  • Operating Temperature: 0° to 50° C, storage temperature -25° to +70° C.
  • Humidity: 0% to 95% non-condensing.
Contact Information: For more details, contact Doble Engineering Company at [email protected] or call +1 617 926 4900.
See more

Catalog excerpts

M5400-1

M5400 Sweep Frequency Response Analyzer (SFRA) A tool for detecting “hidden” transformer faults The M5400 detects mechanical failure or movement of windings due to short circuits, mechanical stresses or transportation. Use it to ensure transformer performance, reduce maintenance cost, and increase the service life of transformers. A major advance in transformer condition analysis. The M5400 uses Sweep Frequency Response Analysis, a proven technique for making accurate and repeatable measurements. Pioneered by Doble the sweep approach has become the industry standard and is the preferred method for making frequency domain measurements. Here’s how SFRA works: The M5400 sends an excitation signal into the transformer and measures the returning signals across a broad frequency range. By comparing this response to baseline and other results (such as from similar units), you can identify deviations and confirm internal mechanical problems. DIAGNOSE problems early. PREVENT expensive equipment Take CONTROL. Why wait for problems to develop? With the M5400’s non-intrusive test technique, you can test your power apparatus any time you suspect a problem. Or just use it as part of your regular maintenance program. Either way, you identify problems before they lead to failure, such as: • Core movement • Winding deformation and displacement • Faulty core grounds • Partial winding collapse • Hoop buckling • Broken or loosened clamping structures • Shorted turns and open windings M5400 Sweep Frequency Response Analyzer (SFRA) For Transformer Core & Winding Movement Diagnosis.

 Open the catalog to page 1
M5400-2

M5400 SFRA Technical Specifications Excitation Source: Channels: 1 Frequency Range: 10 Hz – 25 MHz Output Voltage: V peak-to-peak at 20 50 Ohms Output Protection: Short circuit protected Source Impedance: Ohms 50 Physical Specifications: Dimensions: 1 8.2 x 13.4 x 6.7 inch 46.2 x 34.0 x 17.0 cm Weight: Power Supply: Temperature: to 50° C operating, 0° -25° to + 70° C storage Relative Humidity: to 95 % non 0% condensing PC Requirements: With minimum configurations as: Ethernet/USB Windows 2000 or Windows XP Intel Celeron 1.3 GHz Minimum 512 MB RAM or more Minimum 40 GB DVD-RW Specifications are...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.