Catalog excerpts
High-productivity Compact Turning Center Added with Y-axis
Open the catalog to page 1High-productivity Compact Turning Center with Y-axis Based on Lynx Series Lynx Y series addition of stable and rigid Y-axis based on Lynx model makes possible to complete machining in 1 set-up. The longest Y-axis off-center machining is available, and through reducing cycle time and non cutting time provides your productivity improvement. LM guide structure makes high precision and speed, so this helps machining ability. Also, new Doosan operation panel designed ergonomically provides convenience.
Open the catalog to page 21 Added with Y-axis The addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity. 2 High productivity All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity. 3 Operation Convenience New Doosan operation panel designed ergonomically and 10.4” color LCD provides convenient operation for operators
Open the catalog to page 3Added with Y-axis The addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity. Y-axis travel distance Y-axis rapid traverse rate In the Y-axis plane, tools can move in a plus or minus direction perpendicular to the Z-axis and spindle center line. Viewed from the operator's perspective, this Y-axis motion is toward or away from the door of the machine while X-axis moves from floor to ceiling. Y-axis enables various shape of cutting. Y-axis is realized virtually by the linear interpolation and synchronous movement...
Open the catalog to page 4Basic Structure High Rigid & Stable Machine Structure Having roller type LM Guide at all axes applies high rigidity and high accuracy. Travel distance X-axis Z-axis Rapid Traverse Rate 205 mm (8.1 inch) 350 mm (13.8 inch) (Y) 560 mm (22.0 inch) (LY / LSY) X-axis Z-axis Capacity Lynx 220YA / LYA / LSYA Spindle speed Max. Turning diameter Bar working diameter Chuck size
Open the catalog to page 5High productivity All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity. Turret Turret Indexing time (1 station swivel) Max. Rotary tool speed Productivity Effect Workpiece : Machinery Component Material : Aluminum (AL7075) Workpiece size : Ø70 x 35 mm Cutting tool : 16 set Finished processing time comparison General Cutting Process * Cutting time curtailment : Tool change time & Rapid traverse rate Calculation Lynx Series added with SY-axis, enabling One Set-up Save time, reduce labor, high accuracy!
Open the catalog to page 6Operation Convenience New Doosan operation panel designed ergonomically and 10.4” color LCD provide convenient operation for operators Doosan’s New Operation Panel 1 1. 0.4” color LCD : Easy to control and programming 1 2. nique operator panel of Doosan Infracore designed with membrane switches U 3. ew operator panel for all the models with enhanced accessibility N 4. ser configurable, detachable buttons to set up customized options U 1 Doosan-Fanuc i series 5 Ethernet Connectivity (embedded) Large 10.4" LCD screen showing error messages of the machine and controller improves operator’s...
Open the catalog to page 7Easy Operation Package These DOOSAN software packages have been customized to provide user-friendly functions. Programming G Code list M Code list Operator can check the meaning of each G-code. Calculator Operator can check the meaning of each M-code. Operator can calcute numerical formula in relation to arc and hole easily. Operation / Maintenance Tool load monitor opt. Operation rate - user log in Back up custom data The main function of this software is to detect overload when a tool is wrong, and change it to an other tool. Stop machine to protect a tool holder and next tools by...
Open the catalog to page 8Power-torque Diagram Main Spindle Lynx 220YA / LYA / LSYA Torque : N.m (ft-lb) Lynx 220YA / LYA / LSYA Torque : N.m (ft-lb) Lynx 220YC / LYC / LSYC Spindle speed (r/min) 0 Torque : N.m (ft-lb) Lynx 220LSYA [LSYC] Torque : N.m (ft-lb) Lynx 220Y / SY / LSY Spindle speed (r/min) 1125 Lynx 220Y / SY / Rotary Tool LSY Spindle Spindle speed (r/min) Spindle speed (r/min) Spindle speed (r/min) Spindle speed (r/min) Spindle speed (r/min) 0 Spindle speed (r/min)
Open the catalog to page 9Tool Interference unit : mm (inch) Interference Area with Tail Stock Spindle Center Ø175 [Main (6.9) spindle /6-inc h chuc k] Interference Area with Tail Stock Spindle Center Ø175 [Main (6.9) spindle Ø1 /6-inc h chuc [Su 35 k] b s (5.3 pin ) dle /5 -in ch ch uc k] Interference Area with Sub Spindle Spindle Center Interference Area with Sub Spindle 52.5(2.1) 52.5(2.1) 105 (4.1) [Y-axis travel] Spindle Center
Open the catalog to page 10External Dimensions unit : mm (inch) External Dimensions SIDE CHIP COVEYOR (Hinged Type) SPINDLE CENTER SIDE CHIP COVEYOR (Hinged Type) SPINDLE CENTER
Open the catalog to page 11Working Range unit : mm (inch) 560 (22.0) (TAIL STOCK TRAVEL) 560 (22.0) (TAIL STOCK TRAVEL) Straight Milling 80 (3.1) 560 (22.0) (QUILL TRAVEL) (TAIL STOCK TRAVEL)
Open the catalog to page 12(Z-AXIS TRAVEL) 560 (22.0) (TAIL STOCK TRAVEL) Angular Milling 560 (22.0) (TAIL STOCK TRAVEL) 80 560 560 (22.0) (22.0) (TAIL STOCK (3.1) (TAIL STOCK TRAVEL) TRAVEL) 26 104.5 (4.1) (1.0) 80 (3.1) 560 (22.0) (QUILL TRAVEL) (TAIL STOCK TRAVEL) unit : mm (inch) (Z-AXIS TRAVEL)
Open the catalog to page 13Working Range unit : mm (inch) Lynx 220LSYA / LSYC 46 (1.8)(LSYA) / 27.5 (1.1)(LSYC) Double ID Tool Face Tool (Z-AXIS TRAVEL)
Open the catalog to page 14560 (22.0) 560 (22.0) (B-AXIS TRAVEL) (B-AXIS TRAVEL) 46 Tool [Main / (1.1)(LSYC) Double OD (1.8)(LSYA) / 27.5 Sub] Angular Milling
Open the catalog to page 15Tooling System unit : mm (inch) Drill Socket Drill Straight Milling Head Milling Arbor Adapter Angular Milling Head U-Drill Sleeves U-Drill Collet Adapter Weldon Adapter Face Tool Holder 20 (0.8) Cut-Off Tool Holder Cutting Tool O.D Tool Double O.D Tool Holder (F) 20 (0.8) Triple I.D Tool Holder ø20 (0.8)
Open the catalog to page 16Straight Milling Head Angular (offset) Milling Holder Drill Socket Drill Collet Adapter Milling Arbor Adapter Angular Milling Head U-Drill Sleeves U-Drill Weldon Adapter Face Tool Holder 20 (0.8) Double I.D Tool Holder Boring Bar Double O.D Tool Holder (R+L) 20 (0.8) Triple I.D Tool Holder Double O.D Tool Holder (F) U-Drill Sleeves U-Drill Double O.D Tool Holder (R) 20 (0.8) Cut-Off Tool Holder
Open the catalog to page 17All DN SOLUTIONS catalogs and technical brochures
-
PUMA TL2000/2500 series
24 Pages
-
PUMA 600/700/800 II series
26 Pages
-
PUMA 4100/5100
32 Pages
-
PUMA 2100 / 2600YⅡ series
24 Pages
-
PUMA GT series
36 Pages
-
PUMA MX series
36 Pages
-
PUMA MX1600/735 SERIES
4 Pages
-
Lynx 2100LY series
28 Pages
-
PUMA TW series
28 Pages
-
PUMA2100/2600 Y/SYⅡseries
4 Pages
-
Lynx 2100G
4 Pages
-
LEO 1600
8 Pages
-
NHP 4000/5000
20 Pages
-
DNM 400a
4 Pages
-
NHP series
28 Pages
-
HP 4000 II / 5100 II series
20 Pages
-
HC II series
20 Pages
-
PUMA T W2600
20 Pages
-
PUMA VTR 1216
4 Pages
-
VC 3600
4 Pages
-
DMP 500/2SP
4 Pages
-
T 4000 series
20 Pages
-
T 3600D
4 Pages
-
Lynx 2100 series
32 Pages
-
PUMA ST series
28 Pages
-
BM 2740U
4 Pages
-
puma smx series
28 Pages
-
PUMA VT series
24 Pages
-
PUMA 600-700-800 xl/ly/xly
20 Pages
-
PUMA 4100-5100 series
28 Pages
-
PUMAGT series
24 Pages
-
Lynx 220, 220L
20 Pages
-
PUMA HT / QL series
28 Pages
-
DCM series
20 Pages
-
Lynx 300 / 300 M
4 Pages
-
Lynx 220 series
20 Pages
Archived catalogs
-
PUMA V8300
4 Pages