Surge Protection Devices Hardened Surge Protection Device – RJ45 EtherWAN’s PD1041 Hardened Surge Protection Device is designed to protect your EtherWAN Switch investment; however any Ethernet network device can be protected from dangerous electrical surges. Designed for harsh environments, the PD1041 can be placed where you need it to protect your valuable network equipment. • Protection Solution Against Voltage Surge ◦◦ Provides pair-to-pair protection through RJ45 connector • Flexible Installation ◦◦ Supports DIN-rail or desktop installation • Wide Temperature Range ◦◦ Provides -40°C to 75°C operating temperature range for extreme environments • Compatible with 10/100BASE-T, Gigabit and PoE products ◦◦ Pass-through Data and PoE Power

Maximum continuous operating voltage UC • < 3.3V DC Maximum continuous voltage UC (wire-wire) • < 3.3 V DC (± 60 V DC/PoE+) Maximum continuous voltage UC (wire-ground) • <180 V DC Nominal current IN • < 1.5 A (25 °C) Operating effective current IC at UC • < 1 |J.A Residual current IPE • < 8 |J.A Nominal discharge surge current In (8/20) ^s (Core-Core) • 100 A Nominal discharge surge current In (8/20) ^s (Core-Earth) • 2 kA (per signal pair) Total surge current (8/20) ^s • 10 kA Nominal pulse current Ian (10/700) ^s (Core-Core) • < 40 A Nominal pulse current Ian (10/700) ^s (Core-Earth) • < 160...

Ordering Information Model Hardened Surge Protection Device – RJ45 *Note: CAT6 cable is recommended